b18a1 with b16 tranny swap in to crx question

We may earn a small commission from affiliate links and paid advertisements. Terms

LsB16CrxHF

Senior Member
iove been puttin the car together piece by piece over the winter, it has a jdm b16 tranny on the b18 and i cant get a clutch cable onto the lever. the stock crx dx wont fit so i tried an DA integra cable and both wont reach the lever. am i doing something wrong or am i a moron?
 
you need to feed the wire into the cabin and attatch it to the pedal first, then attacth it to the handle on teh tranny. If you bought a 91 teg cable it should make it with room to spare.
 
Originally posted by B16CRX@May 14 2005, 05:03 PM
you need to feed the wire into the cabin and attatch it to the pedal first, then attacth it to the handle on teh tranny. If you bought a 91 teg cable it should make it with room to spare.
[post=499261]Quoted post[/post]​


its already attached to the pedal and it still doesnt reach the lever :wtf:
 
Originally posted by LsB16CrxHF+May 14 2005, 07:03 PM-->
@May 14 2005, 05:03 PM
you need to feed the wire into the cabin and attatch it to the pedal first, then attacth it to the handle on teh tranny. If you bought a 91 teg cable it should make it with room to spare.
[post=499261]Quoted post[/post]​


its already attached to the pedal and it still doesnt reach the lever :wtf:
[post=499291]Quoted post[/post]​


well, thast gay. This is in a CRX, right?

This is what you need with the part number: Clutch Cable 22910-SK7-A02 90-91 integra
 
Originally posted by B16CRX+May 14 2005, 10:11 PM-->
Originally posted by LsB16CrxHF@May 14 2005, 07:03 PM
B16CRX
@May 14 2005, 05:03 PM
you need to feed the wire into the cabin and attatch it to the pedal first, then attacth it to the handle on teh tranny. If you bought a 91 teg cable it should make it with room to spare.
[post=499261]Quoted post[/post]​


its already attached to the pedal and it still doesnt reach the lever :wtf:
[post=499291]Quoted post[/post]​


well, thast gay. This is in a CRX, right?

This is what you need with the part number: Clutch Cable 22910-SK7-A02 90-91 integra
[post=499346]Quoted post[/post]​



yeah its a 1988 dx with a 1991 b18a1 and 93 JDM b16 tranny...its pissin me off, sum dude gave em a cable and said it was a DA integra cable..thanks for the help
 
Back
Top