busted tranny.......no more!

[Taco15]

bump for updates!

 

[MikeBergy]

My advice - don't buy your tranny back. do a hydraulic conversion like I was telling you and get a type r transmission. Either a jdm or usdm will be fine. You'll get a stronger and younger transmission, and they come with an LSD. You can get them for decent prices as well. You said, you basically are getting your buddy's ls transmission in echange for your busted one? Cool deal. Sell that ls, and you'll have more money to put toward the itr trans. My .02

 

[Taco15]

well my biggest issue was getting the car back on road for my mom. I dont have the money anymore to do the coversion. So thats out of the question. I bought it back already for the sake of the short gears. I just got new axles and starter brand FOR FREE thanks to my buddies at the shop.............they owe me like 400 bucks. Unfortunately they can only charge since they dont have any cash on hand right now. Anyway i got 300 bucks left and with that i'm gonna buy a new 7.5 lb fidanza or exedy flywheel. If i have anyleft over i i'll get a new exedy clutchIF I HAVE ANY MENY LEFT. LOL Later on down the road i will rebuild the tranny again with new syncros and new quaife. but thats loooong down the road. And again it will ony cost me 300 bucks. thanks to my shop friends and their race connections!

Mike i was thinking about the converting and the newer transmission. Hell i was seeing good deals. Honda here sells the type R tranny new for about 1500. I just didnt have the money. And i didnt have the downtime anymore. my mom and dad are sharing are one car and i told them i could help.

My car hasnt been out yet and i've got two races lined up! jdm gsr hatch and a 92 hatch with sprayed 75 dry ls. Apparently word has gotten around town that my car is pretty quick................ever since i beat a turboed 4dr gsr. lol Damn know i gotta fight to stay on top! Any ways thanks for reading guys. it looks like things are starting to go my way. I getting my car fixed and hopefully this immigration thing will be soon over.

 

[TurboMirage]

i'd buy the clutch and not the flywheel. you need the clutch now right? you said stock clutch doesnt hold the power? or do you have one already?

if you do, then get the flywheel

 

[Taco15]

well the outside plate of the clutch is banged up. It doesnt look like it hurt anything mechanically. The flywhell is just for better throttle response. The car is really close to pushing 200whp. If its not already. The clutch is stock and had plenty of life left when i put the new motor in. DO YOU THIKN ITS GOOD ENOUGH? I might have to wait though unless i get more money. The flywheel i'm ordering today from ebay! heres the links to my options. tell me what you think,.

if you have any suggestions feel free to add them!


http://cgi.ebay.com/ebaymotors/FIDANZA-Fly...sspagenameZWDVW

http://cgi.ebay.com/ebaymotors/ACT-XACT-PR...sspagenameZWDVW

 

[MikeBergy]

the ACT prolite would be my choice, but either will be a good addition to your build.

 

[Taco15]

ALREADY ORDERED IT!!!! cant wait to get it in. The car will be running by the end of the week

 

[MikeBergy]

good to hear! You will notice a good bit of jump in acceleration. Now to get you legal and working again!

 

[Taco15]

Quoted post[/post]]
good to hear! You will notice a good bit of jump in acceleration. Now to get you legal and working again!

yeah really well i called my freind to see if he ordered it yet. He said he found one hear in town for 100 bucks. Were going tomorrow to have it turned for surface rust. Gonna see if its any good. If it is the car will be running tommorow! and is going to get nitroused at the next rack event. My buddy from the shop said he's got a kit from his small block that i can use. we just gotta fine tune it so it wont run lean or rich.


I'm calling to setup and appointment tom to see my attorney. damn i hope i can get leagal real soon.

I WILL HAVE VIDEOS!!!!!!