We may earn a small commission from affiliate links and paid advertisements. Terms
I've had this happen to me before. Put a screw driver or something underneath the valve cover near that stripped nut and start putting force on the cover like oyu are prying it off. At the same time take a ratchet and keep spinning the nut loose. It will eventually give.Quoted post[/post]]
i dont have a vice grip or dremel. You think it would be a bad idea to hammer it from the side to force the stud to break? I do have replacement studs. Just wondering if that might damage the threads in the head.
Quoted post[/post]]
Make sure you don't damage the gasket surface while doing that^^^.
drill it outQuoted post[/post]]
bolt is in the head, just barely beneath. How do i get it out?