ok, this is my setup
95 civic with a 94 GSR with a chipped P28
t3.t04e
JRC Intercooler
Greddy BOV
Tial WG
Love Fab Mani
My own DP
450cc injectors with dsm resistor box.
Using Jeffs(final.bin) as a basemap from http://www.xenocron.com/ that i stumbled upon.
i just put my feed on today along with my injectors and resistor box. now, i used a multimeter to find out what wires went to my injectors... and i pluged up the white wire off of the resistor box(1 out of 5 wires) to the wires leading to the dead end connector and i wired the other 4 black wires to the ones going to my injectors... did i do this right??
also, i am using a BURN1 Moates burner and i have programmed my chip. i followed the instructions on how to install it, its on COM2, everything was right, i programmed it, then tested it and it said that the chip was succesfull, then i did a blank test, and it said it was not blank.
so i dont think it is a bad chip/burn, but it might be. but maybe something is wrong iwth my wiring too
HELP ME!!!!
thanks for reading this loooong thread
-Mike
95 civic with a 94 GSR with a chipped P28
t3.t04e
JRC Intercooler
Greddy BOV
Tial WG
Love Fab Mani
My own DP
450cc injectors with dsm resistor box.
Using Jeffs(final.bin) as a basemap from http://www.xenocron.com/ that i stumbled upon.
i just put my feed on today along with my injectors and resistor box. now, i used a multimeter to find out what wires went to my injectors... and i pluged up the white wire off of the resistor box(1 out of 5 wires) to the wires leading to the dead end connector and i wired the other 4 black wires to the ones going to my injectors... did i do this right??
also, i am using a BURN1 Moates burner and i have programmed my chip. i followed the instructions on how to install it, its on COM2, everything was right, i programmed it, then tested it and it said that the chip was succesfull, then i did a blank test, and it said it was not blank.
so i dont think it is a bad chip/burn, but it might be. but maybe something is wrong iwth my wiring too
HELP ME!!!!
thanks for reading this loooong thread
-Mike