YBLEGAL
Regular Member w/ Cheese
Ok so I recently cleaned my intake manifold really good. It was filthy to say the least. So I'd like to prevent that from happening again. I've been researching catch can systems but I'm still a little unsure. So before I start hooking up vacuum to the wrong stuff or something, I'm asking for the help of HS to approve my design.
Concerning my B16 btw.
I've come up with a dual catch can arrangement. One of the catch cans has a filter breather on top and will have only the hose from the stock valve cover port going to it for catch during WOT. The other catch can will have a hose from the crankcase vent port on the block and a hose to the intake with a pcv check valve in line to provide savaging during part throttle and idle. Both cans will have baffles. Just didn't draw them.
Will it work?
Thanks for any input
Concerning my B16 btw.
I've come up with a dual catch can arrangement. One of the catch cans has a filter breather on top and will have only the hose from the stock valve cover port going to it for catch during WOT. The other catch can will have a hose from the crankcase vent port on the block and a hose to the intake with a pcv check valve in line to provide savaging during part throttle and idle. Both cans will have baffles. Just didn't draw them.
Will it work?
Thanks for any input