'89civicSI
Junior Member
I have a `89 civic 1.6 16v D16A6. This engine is replaced wiht a d16a9 from a ´89 crx. I used my own SI wiring on the d16a9. There are some difrences. The d16a9 has a sensor less on the pgmfi intake. The crx engine doesnt have a catalatic conferter and therefor also no sensor on the outtake. Also is there some diffrence in the vacuum hoses.
I have rewired the cam angle sensor. The car runs fine but at stationaire drive the rpm is between 900 and 1500 and goes up and down. So my question do i have to do some more rewirring or must i find the problem somewere else
I have rewired the cam angle sensor. The car runs fine but at stationaire drive the rpm is between 900 and 1500 and goes up and down. So my question do i have to do some more rewirring or must i find the problem somewere else