Hey guys, iv been doing alot of researching and iv decided that the s2k cluster swap isnt for me. i decided to go with the JDM 1993-1997 Del Sol cluster! so im in need of pinouts so i can make a plug and play harness so i dont have to ruin my OEM cluster harness. thanks in advance!!
btw, if your wondering about the fitment issue im going to buy one of the gauge pod cluster bezels as seen here -
and here is the cluster ill be using
heres a stocker JDM cluster
i plan on putting in a oil pressure pod in place of this persons air/fuel, and in place of the stock clock that is in this spot.
then im going to cut it, and shave it a little so it matches up with the del sol cluster.. im assuming this will work, i dont have any actual measurements on it, it just looks to fit.
-however i do own a plastic welder so i can pretty much make my own bezel if i have to.
also, if any of you have seen a write up somewhere of someone doing this itd be great if you could link it, for i have searched and came up with NOTHING.
thanks again!
btw, if your wondering about the fitment issue im going to buy one of the gauge pod cluster bezels as seen here -
and here is the cluster ill be using
heres a stocker JDM cluster
i plan on putting in a oil pressure pod in place of this persons air/fuel, and in place of the stock clock that is in this spot.
then im going to cut it, and shave it a little so it matches up with the del sol cluster.. im assuming this will work, i dont have any actual measurements on it, it just looks to fit.
-however i do own a plastic welder so i can pretty much make my own bezel if i have to.
also, if any of you have seen a write up somewhere of someone doing this itd be great if you could link it, for i have searched and came up with NOTHING.
thanks again!