vanillakilla
Senior Member
well I finally got my car back from the frame shop and I put my motor back in and I am having problems with the clutch cable. The clutch cable doesn't reach the arm that actuates the throwout bearing. I adjusted the cable at the pedal to give me the most extra cable I can get and it is still about 2 inches away. I am really stumped as to why this would happen because I haven't touched it since the motor has been out of the car, and everything went togethor fine when I did the clutch last july. I dropped the tranny to make sure nothing was out of place with the throwout bearing and everything is fine. I will work on getting pictures but something is definately wrong. All suggestions greatly appreciated