I haven't called the credit card company. Trust me, the credit card company will get my money back, as in the e-mail, I know that paypal won't do shit.
A stock intake cam is NOT skunk2 intake cam.
A amp with a broken remote terminal is NOT a good amp.
A set of pistons with broken rings and a set that is 81mm is NOT 81.5mm and "like brand new" as described.
DEFEND THAT YOU THEIF.
I'm busy with school, but you just motivate me to call my credit card company.
From: "Kinh Huynh" <specie09@hotmail.com>
To:
tnsxsear@hotmail.com
Subject: Re: Skunk2 Stage 1 cam
Date: Sat, 04 Oct 2003 19:51:11 -0400
like i said, if i was at fault with the cam and it was the wrong one, i will gladly refund you the money, But im trying to find out by the guy i bought the cam from if he sold me the wrong one also.. Ill let you know by the end of tonight, than i will fefund the money for the cam.-paul
--------------------------------------------------------------------------------
Get 10MB of e-mail storage! Sign up for Hotmail Extra Storage.
If you don't want to resolve this, I'll ship all of the parts (Rockford fosgate amp, camshaft, and the pistons) back on Monday. I wanted to confirm the address:
I can keep the amp for spare parts, but I'd need a refund for $120 for the camshaft. If not, I'm going to ship all of the parts out on Monday and contact my credit card company the same time. As of now, I have not contacted them.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Thu, 02 Oct 2003 02:10:14 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Wed, 01 Oct 2003 19:35:10 -0400
>>
>
>Sorry to hear that, i bought the cam off of ebay, i will be gladly
>to refund you for the cam.. As for the pistons they are not 81mm,
>measure them or try putting them into a stock b-series block and
>they will not fit, they are .10 over. The amp is exactly what i said
>it was, an 100x2 rockford fosgate amp... But like I said, I will
>refund for he cam.-Paul Sorry for the inconvienence...
Paul,
I just received the package today.
The cam is not a Skunk2 Stage 1 cam. The Skunk2 cams have a "M" and a "2"on the base lobe, the cam you sent me does not. It has a "E" stamp on it. It very much looks like a stock Honda vtec cam. I'm not sure of which variety though.
The pistons are 81mm, not 81.5mm like you had stated. Also, one of the ring is broken so I can't use it. No wrist locks came with it either.
The amp is missing the remote terminal, so I'm not even sure if it works.
I'd like a refund for the parts, since the parts aren't how they were described. Let me know how you want to work this out. Thanks.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Mon, 29 Sep 2003 23:22:58 +0000
>
wassup bro, everything was shipped out today, should take 3-5 business days, so expect it to be their by saturday. the tracking number is
you can check it at usps.com
-paul
>From: "Kinh Huynh"
>To:
tnsxsear@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sun, 28 Sep 2003 16:55:47 -0400
>
I'll tell my friend about it. They are the JE not the lower quality SRP, right? Could you check to see how much new rings are? I'll be able to send you the payment in an hour when I can log into paypal. Thanks.
I'm using a stock b16 head, thinking about the AEBS intake manifold. Still not sure on the header though, maybe Bisimoto, headertech, or dc jdm 4-1.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sun, 28 Sep 2003 19:13:25 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sun, 28 Sep 2003 14:15:31 -0400
>>
>
>
>
>yeah ill have everything shipped out tomorrow before 12noon. The
>pistons only took about 2 weeks after i ordered them, i can get your
>friend a set of brandnew ones std bore,.10 over or whatever he needs
>with wrist pins,rings, and locks for like 400 with my discount with
>them. what kind of head are you using? what kind of manifold, you
>should use a gsr/water pump,oil pump and timing belt with the
>ls/vtec and some ARP headstuds or brandnew stock GSR headbolts..
>-paul- .. Well im gonna pack everything right now.....
All right, I'll send you the paypal tonight. Will you have everything out tomorrow morning? I guess I'm a little excited trying to get the project started. JE made them exactly to the specs as the jdm itr pistons? How long did it take? My friend is wants a set of custom pistons for his setup also.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sun, 28 Sep 2003 16:31:19 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sun, 28 Sep 2003 10:44:37 -0400
>>
>
>
>pistons are in good shape, you wont be dissapointed, i think i have
>an extra SRP box somoewhere to put them in. for the amp, nah i dont
>have he manual. and the exhaust cam, i sold that a while ago to a
>buddy of mine who needed one cuz his crower exhaust cam snapped in
>half. -paul
>
>tnsxsear@hotmail.com
That sounds good Paul. Pistons are in good shape, right? I just wanted to verify that nothing is wrong with them, correct? Would you happen to have the box that came with them? I'll send out another paypal to you tonight. Also, do you have the box and manual for the Rockford amp and what happened to the Skunk2 exhaust cam?
Thanks again.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sun, 28 Sep 2003 04:20:39 +0000
>
ts gonna be about 11.7:1 with a b16 head and oem headgasket in an ls, ill weigh them tomorrow whe i can get a scale to measure them...and since you got that other stuff, ill sell them for 225 and ill pack them in with the other stuff...-paul just let me know so i can start packing everything good..-paul
>From: "Kinh Huynh"
>To:
tnsxsear@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 19:09:11 -0400
>
I'm going to put this in a ls/vtec also. Do you know the cc on it, that way I can calculate the CR. IF it's 11.8:1 on a b16, it'll be a whole lot on a ls/vtec. Let me know if you find out the weight, and cc. Also, what's the lowest you can sell it to me, since I've bought your other items? Thanks.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 21:37:57 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sat, 27 Sep 2003 16:08:04 -0400
>>
>
>
>As for pistonweight, i dont know, but i can find out. Compression
>wise, it should bring it up to about 11.8ish in a b16 and a lil more
>in a gsr. I dynoed my car last week, and hit 196whp and 143lb tq.
>All it is is a ls/vtec with endyn pistons, pauter rods, jun 3 cams,
>skunk manifold, type-r tb, 2 layer headgasket and a hondata ecu with
>a very light port work on the head which is a b16. A very basic
>setup.I should be able to hit 200+whp once i get it really tuned and
>some good headwork. I got the endyns for 425 from a friend of mine.
>And for offers so far the highest i have got is 235.. Im just
>trying to get rid of them, and yeah they come with the locks
>also....-paul
What is your setup and have you dyno it yet? I wanted a compression ratio around 11.8:1 since I'm going NA also. How much does each piston weigh? Comes with the lock also, right? I really like the Wiseco more because I've read that the material is thicker around the edges. How do you like the Endyns and how much did they cost you? Have you received any offers on the pistons yet?
Thanks.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 18:42:10 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sat, 27 Sep 2003 14:38:55 -0400
>>
>
>
>The compression wasnt as high as i wanted it, and since im using
>jun3 cams which have a high ass lift i need something more than
>12.5:1 comp, so i just switched them out when i did the compression
>test with the JE's .. I paid 450 for them since they were a custom
>spec piston. I can guarentee none of your friends will have these
>pistons also... and for 250 im losing out, but their just sitting
>here, they come with the pistons,the rings and wrist pins.. -paul
I'm thinking about them. Money on my account is kind of low, but they might be something that I can use. How did you ended up using them for only a few miles and taking your whole bottom end apart?
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 18:35:31 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sat, 27 Sep 2003 14:32:39 -0400
>>
>
>
>yeah their 81.5 some custom ones i bought from JE, but i went with
>higher compression, these are some dope ass pistons and will work
>good with the skunk cam and maybe a skunk manifold and TB.. I
>switched to some Endyn rollerwaves with 12.8:1 comp. New rings cost
>anywhere from 60-100bux depending where you get them from... These
>pisons are like brandnew, you can prolly re-use the rings since the
>have 5miles on them..-paul
They're 81.5mm, right? What pistons did you ended up going with? Do you know how much new rings would cost? Thanks.
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 18:15:15 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sat, 27 Sep 2003 14:12:07 -0400
>>
>
>here you go,let me know if you need anything else, so i can ship it
>al at once -paul
>how about some custom JE pistons?
>
>
http://forums.clubsi.com/showflat.p...3026933&page=1&view=collapsed&sb=5&o=&fpart=1
Thanks Paul.
Can you also link me to your ad again? I think there was something else that I might have been interested in, but not sure though. Thanks.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 18:06:46 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sat, 27 Sep 2003 13:18:13 -0400
>>
>
>
>payment was recieved... It is curently 12:03 here in TX, so i cannot
>ship it today since post office closes at 12, but until monday. to
>
>
>and i will email back with a tracking number from thee USPS.. -paul
If the amp and the cam is in good condition, nothing wrong with both, I'm going to send you the paypal. I'm logging into paypal now. It'll have my address on there. Thanks.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 17:11:31 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Re: Skunk2 Stage 1 cam
>>Date: Sat, 27 Sep 2003 13:06:54 -0400
>>
>><< rockford.jpg >>
>
>
>its kind of like that but its grey in color and it has the Rockford
>fosgate symbol in the middle slanted. I can do 120 shipped for just
>the cam or 160shipped for the cam and amp to cover shipping... -paul
>
>my paypal account is
tnsxsear@hotmail.com
>
>if you decide yes, reply back with your full address.....
Paul,
If the amp is the same as the one in the picture I've attached, then I'll give you $150 shipped for both to FL 33714. I can send the paypal to you now, if you leave a paypal address. Let me know. Thanks.
Ken
>From: "Paul Johnson IV"
>To:
specie09@hotmail.com
>Subject: Re: Skunk2 Stage 1 cam
>Date: Sat, 27 Sep 2003 00:28:17 +0000
>
>>From: "Kinh Huynh"
>>To:
tnsxsear@hotmail.com
>>Subject: Skunk2 Stage 1 cam
>>Date: Fri, 26 Sep 2003 19:43:22 -0400
>>
>
>
>the cam has only 2000 miles, i bought it off of ebay but chnaged it
>cuz i switched to jun 3's. and the amp is a rockford fosgate punch
>100x2 .. -paul let me know cuz ive gotten plenty of emails for
>the cam ...-paul give me an offer for the amp and cam and their
>your, i can ship it out tomorrow....
><< message3.txt >>