Located in SoCal (Lancaster/Palmdale) PayPal Payments to BSeriesILLEST1@yahoo.com
Got my hours cut at work I'll take any offer that isn't a complete low ball...
Front Brake Pads for 2000 TL - Duralast, Part # MKD787, BNIB. May fit other cars as well i.e. CL, TSX, Accord. Please make sure before purchasing if these will work for you - $20 Shipped
OBD0 PW0 ECU - I just found it in my shed lol. I have no clue where or when I used it lol. It has a clear case on it. I don't know if it works and I don't have any friend's running OBD0 who's cars I could test it out on. - Make an offer
OBD0 PM5 Auto ECU - From my old EF Sedan. Pulled it out when I did my B16/auto to manual swap - Free + Shipping
4040 Proportioning Valve - Was going to put it on my CRX when I did the rear disc conversion but I sold the car before I got a chance - $30 Shipped
OBD0 PR4 ECU - Pulled from my DB1 I sold. I did an OBD1 Conversion on it - SOLD on Craigslist
OBD0 LS Distributor - Pulled from the DB1 mentioned above. Has brand new cap and rotor on it. Cap and rotor literally have 20 minutes of run time on them - SOLD on Craigslist
OBD0 DX Distributor - Fairly new but I bent the shaft the rotor rides on. It still spins but not as freely as it used to. Coil, ignitor, and wire harness are still good though. Make offer for entire thing or if you just want one component off of it.
Pioneer DEH-6500 - No sleeve, no harness. I'm not even sure if it still works -
Bosch Single Wire o2 Sensor - OE Connecter, BNIB - SOLD on Craigslist
B Series Starter - pulled from a running 95 GSR - $40 Shipped.
B Series Hydro Intermediate Shaft - from 95 GSR - $75 Shipped
A/C Torque Mount Bracket - P30 - $45 Shipped
Passenger Side Torque Mount Bracket - I don't remember what car this came off of but it might have been the same car the AC Torque Mount came off of - $25 Shipped
Motegi Racing Center Caps (Only 3 are pictured. I have all 4) - I don't know which wheels they'll fit - $20 Shipped
Z-Flex Eric Tuma Cruiser Deck - Near brand new. Hardly ever ridden. I forgot what exact model it is but it has the Venice Graffiti style underneath the board. Has Tracker Dart trucks, Z-Flex truck spacers, Z-Flex Z-Smooth 63mm wheels, and grip tape - $80 Shipped
Z-Flex 7.5" x 29" Jimmy Plummer Cruiser Deck, Blue - Never used. Has a few scratches from things laying on top of it but other than that, it's in great shape. No grip tape - $40 Shipped
Z-Flex 9" x 34" Cruiser Deck - I forgot what model it is but it's their old design with the palm trees underneath. Paint is kinda chipping/cracking due to just sitting there - $40 Shipped
I still have to sort through more boxes so i'll be adding a couple more parts when I find them.
Pics can be seen here: VariousParts pictures by B16RacerN2NR - Photobucket
Got my hours cut at work I'll take any offer that isn't a complete low ball...
Front Brake Pads for 2000 TL - Duralast, Part # MKD787, BNIB. May fit other cars as well i.e. CL, TSX, Accord. Please make sure before purchasing if these will work for you - $20 Shipped
OBD0 PW0 ECU - I just found it in my shed lol. I have no clue where or when I used it lol. It has a clear case on it. I don't know if it works and I don't have any friend's running OBD0 who's cars I could test it out on. - Make an offer
OBD0 PM5 Auto ECU - From my old EF Sedan. Pulled it out when I did my B16/auto to manual swap - Free + Shipping
4040 Proportioning Valve - Was going to put it on my CRX when I did the rear disc conversion but I sold the car before I got a chance - $30 Shipped
OBD0 PR4 ECU - Pulled from my DB1 I sold. I did an OBD1 Conversion on it - SOLD on Craigslist
OBD0 LS Distributor - Pulled from the DB1 mentioned above. Has brand new cap and rotor on it. Cap and rotor literally have 20 minutes of run time on them - SOLD on Craigslist
OBD0 DX Distributor - Fairly new but I bent the shaft the rotor rides on. It still spins but not as freely as it used to. Coil, ignitor, and wire harness are still good though. Make offer for entire thing or if you just want one component off of it.
Pioneer DEH-6500 - No sleeve, no harness. I'm not even sure if it still works -
Bosch Single Wire o2 Sensor - OE Connecter, BNIB - SOLD on Craigslist
B Series Starter - pulled from a running 95 GSR - $40 Shipped.
B Series Hydro Intermediate Shaft - from 95 GSR - $75 Shipped
A/C Torque Mount Bracket - P30 - $45 Shipped
Passenger Side Torque Mount Bracket - I don't remember what car this came off of but it might have been the same car the AC Torque Mount came off of - $25 Shipped
Motegi Racing Center Caps (Only 3 are pictured. I have all 4) - I don't know which wheels they'll fit - $20 Shipped
Z-Flex Eric Tuma Cruiser Deck - Near brand new. Hardly ever ridden. I forgot what exact model it is but it has the Venice Graffiti style underneath the board. Has Tracker Dart trucks, Z-Flex truck spacers, Z-Flex Z-Smooth 63mm wheels, and grip tape - $80 Shipped
Z-Flex 7.5" x 29" Jimmy Plummer Cruiser Deck, Blue - Never used. Has a few scratches from things laying on top of it but other than that, it's in great shape. No grip tape - $40 Shipped
Z-Flex 9" x 34" Cruiser Deck - I forgot what model it is but it's their old design with the palm trees underneath. Paint is kinda chipping/cracking due to just sitting there - $40 Shipped
I still have to sort through more boxes so i'll be adding a couple more parts when I find them.
Pics can be seen here: VariousParts pictures by B16RacerN2NR - Photobucket
Last edited: