loserpunkx182
Senior Member
1992 Acura Integra 80xxx on the motor 135xxx on the chassis with clean title. I picked this up last summer from a h-t member as a project to turbo. well it's done..this car was just turbo'd and tuned recently on April 17, 2006 by Art from YC Underground. I thought i could do it but with college and living on my own I dug myself into a financial hole. I want to start it at $5500 but is definitely negotiable and prefer trades and if needed + cash since i still do need a car. all the turbo parts and clutch/flywheel are basically brand new with less than 500miles on them since it was just my car to drive to class(5mins each way) here's the goods:
ENGINE:
-2000 B18C1 with chipped OBDI ecu tuned on Uberdata
-Custom made shorty turbo manifold
-blue 38mm tial wastegate with 10psi spring
-2.5' intercooler piping
-xs power bar and plated intercooler 26x6.5x3.5 with 2.5' in/out
-Greddy Type-S bov, it's adjusted hard and sounds nice, like a fludder sound haha
-t3/t4 saab exhaust garrett compressor .48/.60 oil and liquid cooled (both hooked up no leaks) this thing no shaft play and starts to spool real quick
-2.5' downpipe, no cat
-3in thermal exhaust
-Aem adjustable fpr, silver
-DSM blacktop injectors wired up to honda resistor box
-Distributor's less than a month old
-new clutch cable
-Optima redtop less than a year old
-NGK wires and 2step colder plugs gapped at .03, have an extra set that i'll throw in
-MSD set up
SUSPENSION:
-ingall front camber kit, washer trick in the back
-tokico blues, front are less 3000miles, back ones will need to be replaced
-skunk2 coilovers
-02 si wheels
-Cross drilled and slotted rotors on front.
-SPW Rear Strut bar.
-EM Racing C-Pillar brace bar
-Generic fstb
ICE & INTERIOR:
-Autometer Pro-comp ultra-lite Boost and Oil Pressure gauge
-Marshall Fuel pressure gauge
-Apexi Turbo Timer, one that looks like a pen
-Leather seats out of a 98 teggie.
-Autometer Guage pod
-Autometer 5" Phantom tach
-Greddy shift knob
-TWMperformance Short Shifter
-Sony MP3 deck
-Kenwood Component system:
-6 1/2" midranges in door.
-tweeter on door w/ equilizer
-Alpine 6 1/2"Type-S in rear
EXTERIOR:
-VIS oem style cf hood
-sparco hood pins
-ebay one piece headlights
-Mercedes HID balasts & bulbs
-Clear turn signal lens
-custom punched z-3 fenders
-Wings West lip kit and 3piece spoiler
-90-91 red/clear tails
-tint
-m3 mirrors
there's probably some stuff i'm missing.
i'm not goin to lie..the body's got some bad spots..i would rate it 7/10.
email me for more pics!!!
email - loserpunkx182@gmail.com
aim - loserpunkx182
will entertain offers, dont forget about trades welcome
ENGINE:
-2000 B18C1 with chipped OBDI ecu tuned on Uberdata
-Custom made shorty turbo manifold
-blue 38mm tial wastegate with 10psi spring
-2.5' intercooler piping
-xs power bar and plated intercooler 26x6.5x3.5 with 2.5' in/out
-Greddy Type-S bov, it's adjusted hard and sounds nice, like a fludder sound haha
-t3/t4 saab exhaust garrett compressor .48/.60 oil and liquid cooled (both hooked up no leaks) this thing no shaft play and starts to spool real quick
-2.5' downpipe, no cat
-3in thermal exhaust
-Aem adjustable fpr, silver
-DSM blacktop injectors wired up to honda resistor box
-Distributor's less than a month old
-new clutch cable
-Optima redtop less than a year old
-NGK wires and 2step colder plugs gapped at .03, have an extra set that i'll throw in
-MSD set up
SUSPENSION:
-ingall front camber kit, washer trick in the back
-tokico blues, front are less 3000miles, back ones will need to be replaced
-skunk2 coilovers
-02 si wheels
-Cross drilled and slotted rotors on front.
-SPW Rear Strut bar.
-EM Racing C-Pillar brace bar
-Generic fstb
ICE & INTERIOR:
-Autometer Pro-comp ultra-lite Boost and Oil Pressure gauge
-Marshall Fuel pressure gauge
-Apexi Turbo Timer, one that looks like a pen
-Leather seats out of a 98 teggie.
-Autometer Guage pod
-Autometer 5" Phantom tach
-Greddy shift knob
-TWMperformance Short Shifter
-Sony MP3 deck
-Kenwood Component system:
-6 1/2" midranges in door.
-tweeter on door w/ equilizer
-Alpine 6 1/2"Type-S in rear
EXTERIOR:
-VIS oem style cf hood
-sparco hood pins
-ebay one piece headlights
-Mercedes HID balasts & bulbs
-Clear turn signal lens
-custom punched z-3 fenders
-Wings West lip kit and 3piece spoiler
-90-91 red/clear tails
-tint
-m3 mirrors
there's probably some stuff i'm missing.
i'm not goin to lie..the body's got some bad spots..i would rate it 7/10.
email me for more pics!!!
email - loserpunkx182@gmail.com
aim - loserpunkx182
will entertain offers, dont forget about trades welcome
Last edited: