FS: '92 Z6 head and ES front LCA/UCA bushings

[phyregod]

How did the hole get burned in the cap???

Did you ever hear the motor running? Valves in good shape? Mileage? Can you find all of those missing sensors?

I MIGHT be willing to do like $150 shipped for all of it. Yes, thats lowball. No, I don't care.

 

[CoreyR]

ill take the bushings if you can wait till friday. i was planning on buy these anyways this week.

 

[phyregod]

Hrmmm.. No sensors sucks.. Cut VTEC wires, at least Two rusty valves/valve seats. may-be-burned up dizzy with cut plugs... And I have to go hunt down 3 sensors at $30+ a pop used?? I do have a good set of injectors...


I'm gonna offer $100 shipped for the whole mini me swap. If you take it, great. If not, great. One less headache for me to deal with. Sorry for such a low ball, but I could just spend the same money and get a good already working head with sensors and everything. Being that you never heared the motor run, its kinda scary to offer that much.

Maybe you should ebay it. Oh well, $100 shipped is my final offer.

 

[phyregod]

Quoted post[/post]]

Quoted post[/post]]
ill take the bushings if you can wait till friday. i was planning on buy these anyways this week.

Not a problem.

Quoted post[/post]]
Hrmmm.. No sensors sucks.. Cut VTEC wires, at least Two rusty valves/valve seats. may-be-burned up dizzy with cut plugs... And I have to go hunt down 3 sensors at $30+ a pop used?? I do have a good set of injectors...


I'm gonna offer $100 shipped for the whole mini me swap. If you take it, great. If not, great. One less headache for me to deal with. Sorry for such a low ball, but I could just spend the same money and get a good already working head with sensors and everything. Being that you never heared the motor run, its kinda scary to offer that much.

Maybe you should ebay it. Oh well, $100 shipped is my final offer.

So you want me to sell you the entire thing for $30-40 + shipping? That's beyond an insult for the condition this head is in. Thank you, good day.

I know the offer was way low, but I have no idea how much it costs to replace the wires to the dizzy, and would probably end up buying a vtec solenoid with wires for 25ish.. and 3 sensors, 1 for 25ish and the other two usually cost more than 30 each. Then a set of injector seals cost about $10 per injector..

You see, it would cost me $140 to get it serviceable. +100 for the head.. I'm at $240. I can go on ebay and buy a servicable one for that.

Oh well, sorry for the low ball, and free bump for you. I certainly didn't mean to insult you.