FS: Parting out GS-R Motor + GS-R Swap Parts

We may earn a small commission from affiliate links and paid advertisements. Terms

jwn7

Member
:yes:

I am flexible on the prices so don't be afraid to make me a reasonable offer, but exceissive lowballing will be ignored.

I am located in Pittsburgh, PA 15202 for pickup.
Shipping is at your expense and will be via UPS ground, priority mail or Fed ex, whichever you prefer, after payment has cleared. I am paypal verified (but add 3% for paypal's fee).

Will trade for suspension, brake, D series and road racing parts.

Contact via PM on here is preferred. I do not use AIM, but I can also be reached via email at jwn7@pitt.edu.

Click on the thumbnails to see full size pictures.

1998 B18C1 Short Block

75K miles on everything. I tore it apart to build it but ran out of money / had a huge change of plans. Was in perfect running condition when i tore it apart. I have all of the bolts too, so if you need bolts for anything just ask.

GS-R Bare Block
- Needs blasted
- Cylinders don't need honed, but it would be a good idea while it's apart
- Sleeves have no cracks
- Includes main caps, main bolts, bridge thrust washers, and old bearings
- Vin plate is attached and it's legit.




$400 OBO - less if you don't want the other parts. - Sale Pending


GS-R Crankshaft
- Good shape


$200 OBO


GS-R Pistons and Rods
- Great condition
- No scratches anywhere


$100 OBO

GS-R Oil Pan
- Pan has some scrapes on the bottom
- Still in good shape

$100 OBO

GS-R Windage Tray
- Excellent condition

$50 OBO

GS-R Oil Pickup

$25 OBO

GS-R Oil Squirters

$25 OBO

GS-R Right Side Cover

$25 OBO

GS-R Oil Pump
- 75K, still good for another 125K probably

$75 OBO

GS-R Dipstick

$20 OBO

GS-R Crank Pulley
- Good shape
- Includes key and bolt

$50 OBO

Kaiten Kairu 8.8 Pound Flywheel For B Series
- Out for resurfacing now, pictures when it gets back
- Rare JDM part
$250 Firm

GS-R Timing Belt Tensioner

$20 OBO

Two GS-R Clutch Covers
- For some strange reason I have two .. not sure why but i do.

$10 Each OBO

GS-R Clutch Release Fork

$10 OBO

GS-R Front and Rear Engine Stiffeners

$20 OBO

GS-R Front AC Mount Bracket

$30 OBO

GS-R Front Tranny Mount Bracket

$30 OBO

GS-R Oil Pressure Switch

$30 OBO

GS-R Knock Sensor
- Pictures up tommorow
$30 OBO

GS-R Oil Breather Chamber

$30 OBO

GS-R Water Pipe, Thermostat Housing, and Thermostat

$30 OBO - Sale Pending

GS-R Ect Switch
- Pictures up tommorow
$30 OBO

GS-R OEM Headgasket
- New, never used just out of the packaging
- Bought from BERT-O at Gettle Acura last summer :thumbup:

$60 OBO

GS-R OEM Head Bolts
- Used once, only torqued from the factory

$50 OBO

1998 GS-R Bare Head
- 75k miles
- Great shape
- Needs washed & cam caps are not from this head and will need to be align bored.
- Pictures up tommorow
$500 OBO - sale pending

1998 GS-R Cams and Cam Gears
- Pictures up tommorow
$100 OBO

1998 GS-R Distributor
- OBD2a

$100 OBO

Black GS-R Valve Cover
- Needs painted
- A good buy if you want to strip it or paint it something else
- Pictures up tommorow
$40 OBO

Black GS-R VTEC Solenoid
- vtec yo

$60 OBO

GS-R Intake Manifold With All Sensors and Throttle Body
- Not willing to remove any sensors yet
- Not willing to seperate throttle body yet

$200 OBO - Sale Pending

GS-R Fuel Rail

$30 OBO - Sale Pending

Four GS-R Fuel Injectors
- OBD 2a
- Good Shape
- Pictures up tommorow
$50 OBO

GS-R OBD2 P72 ECU
- Never chipped

$100 OBO

Two 4 wire O2 Sensors
- Wires are cut pretty short on one, but can still be spliced

$50 each OBO

97 Civic EX Harness
- Already professionally reworked to swap an obd2 gs-r motor in a 96-00 civic
- Completely plug & play
- Excellent Condition

$250 OBO

1998 Integra Helms Service Manual
- Not forsale until i've sold most of this stuff and no longer need it for reference.
- Good shape, some pages have my oily fingerprints on them.
- An absolute must if you want to put all of that together.

$50 OBO

D Series Front Tranny Mount Bracket

$30 OBO

Sparco Evo 2 Seat
- Never installed in a car
- I bought it used from a friend because he was too big for it. I am too small.
- Includes steel sidemount brackets and bolts.
- The black finish on the fiberglass shell has some scratches, most of them (and the worst ones) are on the bottom. The back has a few, and there is one on the right side just above the bracket.
- Fabric is mint and has no rips anywhere.




apparently i have posted too many images. here are text links to the rest.

http://www.pitt.edu/~jwn7/seat/seat19.jpg
http://www.pitt.edu/~jwn7/seat/seat20.jpg
http://www.pitt.edu/~jwn7/seat/seat21.jpg
http://www.pitt.edu/~jwn7/seat/seat22.jpg
http://www.pitt.edu/~jwn7/seat/seat23.jpg
http://www.pitt.edu/~jwn7/seat/seat24.jpg
http://www.pitt.edu/~jwn7/seat/seat25.jpg
http://www.pitt.edu/~jwn7/seat/seat26.jpg
http://www.pitt.edu/~jwn7/seat/seat27.jpg
$525 OBO
 
Back
Top