GE lsvtec conversion kit ..

[Crix]

Which size do I go with on the kit. It offers stock 81mm bore then goes to 83.5 mm bore.

The setup I have is using .25 oversized b16 pistons(pr3's) Using a b16 head if this matters. Block is a 95 ls block.

Here is the site that I was going by. Just need to know which one to get.

http://www.lightningmotorsports.com/ge_engine.htm

 

[civicious]

buy the kit from www.goldeneaglemfg.com , there's no reason to go through a middleman when you can buy your crack fresh off the coffee filter. You should be able to get an 81.5 or an 82mm from GE's website.

 

[Crix]

if the stock bore size though is 81 and iam oversized to .25 wouldn't it only be a 81.25?

 

[civicious]

Ok, then 81.25....sheesh.


edit: Just looked on GE's page, they only list full sizes. Just call them, when I ordered the kit for my B20 I got an 84.5mm gasket, I'm sure they have 81.25 or whatever other size you could possibly want.

Golden Eagle: (909)592-4311
VTEC conversion: http://www.goldeneaglemfg.com/miva/merchan...ategory_Code=VC