Greddy TD05-18G

[B18aCRX]

I am using a Greddy TD05-18G for my turbo project and I am trying to find the correct size fitting for the oil inlet. I have tried an 1/8 NPT fitting, but it won't fit. Does anyone know what the fitting size is and possibly where to find one, preferably -3 AN, but anything will help.

Also, does anybody know if I can use a normal Mitsubishi midpipe on this turbo? And if not, is there anyplace that sells the Greddy Midpipe by itself?


Thanks

 

[posol]

yeah, greddy sucks and doesn't follow the noraml 1/8 npt to -3 fitting...
they use a gay banjo setup.

FCM2947 -- -3AN x 10mm Banjo
FCM2923 -- 10mm x 1.25 Banjo Bolt



part numbers are for AeroQuip fittings.

good luck

 

[B18aCRX]

Well that is good to know, thanks pissed



Now, anybody know about the midpipe (the 90 degree peice that bolts to the turbo hot side and to the downpipe)

 

[B18aCRX]

bump B)

 

[posol]

no clue- most likely, you're going ot have to go custom onthat oen...

 

[Johnnylawless]

check with Fastturbo.com he should be able to take care of your needs.
thats where I got mine!!!!

 

[B18aCRX]

Fast-turbo.com told me that they don't have anything that will work. They told me to try Greddy directly, but they had already told me that they won't sell individual parts.


So... Does anybody know where I could get a 5-Bolt flange for the hot side of this turbo, so that I can avoid the $75/hr machining costs? Also, does anyone know if a midpipe from any DSM 18g will bolt up?


Thanks everybody

 

[posol]

IMO, sell the 18g and get a t3/t04e.

 

[92civicb18b1]

ebay will have those flanges, get a 90 degree bend from autozone or something like that and have it welded on.

 

[hondaman03]

ATPturbo.com