H22/H23 K20 Camshafs

[bighavic]

Hello everyone and thank you for the help in advance. Well here I go; I currently have a true JDM H23 Dohc Vtec(Blue Top) in my 1996 Honda Accord. I came accross a set of camshafts from a 2006 RSX-S with 50k on them. I understand that these camshafts are off a chain driven motor ( I also currently have a 05 RSX-S). What I''m asking is will they fit? I know the cam gears must be changed but is it worth swaping them from my h23 blue top ( NOT F20). Will I gain any power! What mods!! Thanks for the help!!!

 

[terry]

mhmm i wass wondering the same thing..
sorry but if u have an rsx and an accord do you think u kan add the k20 vtec head on ur h23 bottom end?
if thats possible then that i kno will give u hp..=)

 

[AHHVTEC]

im not sure but it would be cheaper just to buy better cams made for your motor

 

[Bkkfarang]

ummmmmmmmm i thought h series and k series motor spun in opposite directions .one clockwise the other counter closck wise . someone correct me if i am wrong

 

[efhondakid]

I think so, as the tranny is on the opposite side of all the other Honda motors, I could be wrong though.

 

[Justin91civic]

Yes with the way that the motors are set up the k series is going with the rest of the car manufatures and spinning the correct way. Any other honda motor d, b, h or f will spim backwards. So unless you can change directions the cam timing will be all off on that swap.

 

[newb]

Assuming the bearing surfaces will match between the heads and the cams, couldnt you clear up the timing issue with some adjustable cam gear?

 

[bighavic]

Well I got the cams for free and it was worth askin. Thanks

 

[eg6sir]

sell them and buy cams made for your motor