Well i know that... but living on a budget is hard. And i have the silverstars in right now so i dont wanna out back in a stock bulb and it be 2 different colors. And i dont know if i want to ride around with my highbeams on all night.
Well i was just wondering if it was the wiring or the bulb... So if it is the bulb then when i replace it i know it will work. Or would something have shorted out to make just the low beam go out.
Don't make this out to be harder than it should be...
Check your wiring,i once had a wire disconnect from the light harness which caused the low beam to go out,so check that.
Other than that Go buy a bulb,install it and see if it works.
if the other bulb WORKS, and you know it works on both high and low beam, then why don't you just take it out and put it in the other side...
then if the other side works both hi and low with the bulb from the opposite side you know the bulb is shot...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.