Hi Guys,
Have done a B16A2 swap in a Honda City here in India which is Turbo Charged and puts out approx 300whp @ 1 bar of boost. Using a stand alone from Tuned iChips based out of Colombo.
Have the follwing issues that I need help with.
1> Existing issue recently installed a AEM Uego digital AFR and would like to know how I can data log the same. Am not too technical and did not get any kind of software with the guage.
I need to send the afr data log file to my tuner who can then email me another map which i can burn on a chip and run on my car as it is currently running too rich.
In case I need some software is there some site from where I can download the same for free. I think my tuner uses Chrome for tuning the Ecu.
2> Temp guage on instrument console does not seem to be working correctly. Problem the guage goes just a little belwo the half mark and does not move from there. I have installed a Autometer water temp guage as well which shows a lot higher temp than the dash guage. What could be the problem as I am 100% sure that the dash guage is not correct and how do I solve it.
Thanks in advance for all the help.
Regards,
Jignesh
Have done a B16A2 swap in a Honda City here in India which is Turbo Charged and puts out approx 300whp @ 1 bar of boost. Using a stand alone from Tuned iChips based out of Colombo.
Have the follwing issues that I need help with.
1> Existing issue recently installed a AEM Uego digital AFR and would like to know how I can data log the same. Am not too technical and did not get any kind of software with the guage.
I need to send the afr data log file to my tuner who can then email me another map which i can burn on a chip and run on my car as it is currently running too rich.
In case I need some software is there some site from where I can download the same for free. I think my tuner uses Chrome for tuning the Ecu.
2> Temp guage on instrument console does not seem to be working correctly. Problem the guage goes just a little belwo the half mark and does not move from there. I have installed a Autometer water temp guage as well which shows a lot higher temp than the dash guage. What could be the problem as I am 100% sure that the dash guage is not correct and how do I solve it.
Thanks in advance for all the help.
Regards,
Jignesh