hello, i just installed my skunk2 stage1 cams today, everything went well, but for some reason when driving, between 4,000 and 5,000 rpm the car looses almost all power. i'll step on the gas, and its as if i'm not giving it any gas. i know my throttle is opening, because my vafc shows it, also i notice the manifold pressure goes to 0 when this happens. i get the feeling its the ignition somewhere. I checked the timing and it is ok, the intake cam is at 0deg. and the exhaust cam is at +2deg (per skunk2's instructions). i replaced the rotor and cap because the rotor was loose and i thought that was it, but its still doing it. i know its nothing clogging my exuast because i pulled it off and drove it and experienced the same things. it is somewhat intermittant, but most of the time it does this, if i'm real smooth on the throttle i can almost not notice it, but if i punch it, it does nothing but climb very very very very
(did i mention very?) slowly, until around 5K then it picks back up, then vtec comes in at 5.5K and it seems ok.... also, when going downhill in gear, i go to give it gas, and it goes nowhere, and seems worse than when driving on flat/uphill. any suggestions would be great! thank you.
(did i mention very?) slowly, until around 5K then it picks back up, then vtec comes in at 5.5K and it seems ok.... also, when going downhill in gear, i go to give it gas, and it goes nowhere, and seems worse than when driving on flat/uphill. any suggestions would be great! thank you.