help w/b18b swap into 90 civic

[rmgblown]

...greetings from confusious.....iight folks i gota couple of questions....1:what back bracket do i use 2:should i just convert the o2 and the dirtributor to obd instead of obd1(i plan on using the 91 gs ecu) 3: if i stay w/odb should i just use the d16 injectors?.....i would appreciate the replies..thanx

 

[rmgblown]

i mean...DAMN...can i get a little help here...not too much :sleep:

 

[Smonkeyboy]

couple things wrong with that,

91 gs ECU= OBD 0
B18B = OBD 1
that doesnt match up


D16 > B18

no way are you going to want to put D-Series injectors in a Bseries motor, hell i dont even know if they would fit.


and most importantly where are you getting your motor from?

 

[Paperchaser013]

all d series and b series injectors a 240cc. it doesnt matter they all flow the same amount and yes they do fit.


and the b18b will work, just neesd a obd0 dizzy.

 

[dohch22a4]

Originally posted by Paperchaser013@Feb 2 2004, 05:23 PM
all d series and b series injectors a 240cc. it doesnt matter they all flow the same amount and yes they do fit.


and the b18b will work, just neesd a obd0 dizzy.

No, the D-series injectors are 210cc. So, no, they don't flow the same amount.

 

[rmgblown]

thanx...i kew that they would flow a little less so thats why i asked that....and it dosent matter what obd the motor is ...it depends on the harness...but thanks to all

 

[Smonkeyboy]

DONT FORGET THE DIZZY IF YOU GO WITH THE OBD1 MOTOR AND OBD0 ECU!!!!!

 

[rmgblown]

tru...almost forgot