I have everything right??

[CRseX84]

so i have this z6 im putin into my 91 crx dx. im ussing a 90 SI tranny, i orderd a new Exedy clutch, and im getin the ecu converted from auto to 5spd. im getin a OBD 0 - OBD1 harness conversion... is that all i need for the swap??? i know i shuld replace things while i have it out but $$ is limited... i have a si motor in my dx right now that i blew up, so i already converted to MFPI... now i just g2 convert the VTEC!! but let me know if im missing anything? thanks lots guys
Tyler

 

[brian11to1]

as you said you need or should replace parts while its out those parts are:

timing belt
water pump
mounts (since its a basic bolt in)
check the axles
tune up, plugs, wires, cap, rotor, coil, igniter...
fuel filter
fuel injector cleaner etc.
all accessory belts, AC/Alternator/power steering if equipped

just to name a few.... hope it helped, other htan that.. what ECU are you using?the harness you buy should be OBD1 to 0 so you can use hte p28 to control the VTEC on the Z6....