Comngetsum
New Member
Ok here is the senario. I, being a idiot, a few years ago removed my B16A from my 88 CRX. I dissasembled the motor for rebuild and....... well things got complicated. To make a incredibly long story short I have all the motor back together minus one portion. I cannot seem to figure out how to get that bracket the goes between the mount and the engine (tranny) at the rear connected. I think I have all the peices but it is beyond me on where I have gone wrong.
Yes the motor/tranny/peices were in many boxes and has been moved 3 times and it is very possible that I have lost a bolt or two or peices whole.
What I need is a picture of the rear of a B16a with that bracket for the rear mount attached. From that I am sure I can solve my problem.
Moral of the story kids, don't join the Army shortly after removing / dissassembly of your motor, because you will be posted to 3 different locations and if you love your ride you will haul the piece of crap ( sigh!) around for 3 years and screw everything up.
If anyone can help it would be awsome.
btw
I did search images throughout the net and it is impossible to find what I am looking for.
thanks for any help
Yes the motor/tranny/peices were in many boxes and has been moved 3 times and it is very possible that I have lost a bolt or two or peices whole.
What I need is a picture of the rear of a B16a with that bracket for the rear mount attached. From that I am sure I can solve my problem.
Moral of the story kids, don't join the Army shortly after removing / dissassembly of your motor, because you will be posted to 3 different locations and if you love your ride you will haul the piece of crap ( sigh!) around for 3 years and screw everything up.
If anyone can help it would be awsome.
btw
I did search images throughout the net and it is impossible to find what I am looking for.
thanks for any help