I Need To Lean Out My Stuff

[Sinner]

I running way to rich and my fields controller can only do -30% which It is already at. Is there anyother way to lean out the motor?

Nick

 

[Canuck 93 Civic Si]

put some vise grips on you fuel line to decrease the flow

 

[liquid00meth]

maybe look at why your motor is running 30+% rich

 

[posol]

yeah, what is your setup?

I'm assuing your are running large injectors on a vafc hack kinda setup.
what size injectors? whats your fuel pressure at?

 

[pills_PMD]

holy shit batman!! 30% rich!~>?

was this proven with a wideband or a shitty stock O2 and an autometer gauge??

it sounds to me like you've got SERIOUS issues...

 

[posol]

Originally posted by pills_PMD@Apr 24 2003, 04:18 PM
holy shit batman!! 30% rich!~>?

was this proven with a wideband or a shitty stock O2 and an autometer gauge??

it sounds to me like you've got SERIOUS issues...

no. you read that wrong pills.

with the VAFC hack, you run a larger injector, but tune its fuel to like -30% from STOCK at low rpms, as it is a larger injector and needs to idle.

example:
rpm- vafc setting
500 -30%
1500 -28%
3000 -15%
5000- 0%
6000- 10%
8000 - 20%

something like that

 

[liquid00meth]

does that shit actually work?

 

[posol]

its what the VAFC hack is.

basically, by altering the signal to -30% it effectively lowers the voltage sent to the computer.

read up on it.
thedropshop.tv has a write up

 

[B16]

damn, -30% is huge correction, i think at the highest magnitude mine is -13% which is at 5,000 rpm on the low cam. maybe by using some resistors on the map signal you can change it, maybe a variable resistor.. or you could switch to a apex vafc, it will do up to 50%

 

[viciousracing]

this is why i got a hondata. 'nough said.