I am trying to look for some headers that will fit into a 96 Civic coupe with a b16a2 swap. Will a 96 spec ITR header fit without modification? 98 spec?
The type r has a 2.5 collector.
The Cat bolts will not line up, you Can get a Cat ready to accept the collector or just go to a shop and have them weld on a bracket that will line up.
Yes. It will work. But it will hang low because the 1.8l motors are a bit taller.
Heres what my B16/ITR combo looked like. BTW the skid plate is only 3/16-1/4", so don't think thats whats causing the problem.
I had 2.5" clearance. - the bolts.
BTW my brother makes the skidplates. Only $40 shipped LINK
I'm not talking about the collector bolt pattern.
I'm talking about the height of the header.
It's obvious the collector won't line up. Just go to an exhaust shop and take care of it. This is what mine looked like when I did the header swap: (not a factory Honda collector on the exhaust side, but Stock B16 collector on the header)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.