Hey everyone! New to the site and came across this information this morning from this thread.
https://hondaswap.com/civic-crx-ew/need-know-what-cars-i-can-pull-few-parts-462962/
"
Grab the front calipers/rotors from a 1g teg.
You could probably use the (female) seat belts too.
Ecu from a 1g teg if yours is an SI and keep it 5spd/same animal. Actually the whole engine/trans and supporting bracketry/wiring/cooling from a 1g teg.
Whole rear suspension/cables from a 1g teg swap the rear brakes at your leisure. Maybe a 40/40 2g teg prop valve.
Look for headers..
" " Performance mufflers
" " larger rims with same bolt pattern/offset (4x100)
" " early B series resister box injectors
and of course, money/guns under the seats, in trunks"
Was curious and would like more information on the ecu swap and possibly engine swap (my CRX is 1987 SI)
https://hondaswap.com/civic-crx-ew/need-know-what-cars-i-can-pull-few-parts-462962/
"
Grab the front calipers/rotors from a 1g teg.
You could probably use the (female) seat belts too.
Ecu from a 1g teg if yours is an SI and keep it 5spd/same animal. Actually the whole engine/trans and supporting bracketry/wiring/cooling from a 1g teg.
Whole rear suspension/cables from a 1g teg swap the rear brakes at your leisure. Maybe a 40/40 2g teg prop valve.
Look for headers..
" " Performance mufflers
" " larger rims with same bolt pattern/offset (4x100)
" " early B series resister box injectors
and of course, money/guns under the seats, in trunks"
Was curious and would like more information on the ecu swap and possibly engine swap (my CRX is 1987 SI)