knock sensor for p30 ecu

  • Thread starter Thread starter seanjuan
  • Start date Start date
  • Replies Replies 2
  • Views Views 2K

We may earn a small commission from affiliate links and paid advertisements. Terms

seanjuan

Senior Member
my old ecu was a P06 and I will be using a P30 with the b that is currently being put into my car. I've allready checked the wiring articles but there isn't any info about the pinouts of the p06 so I don't know if there are any wires left over that I could use as the wire for the knock sensor.

I'm trying to avoid running a wire through the firewall because I am lazy, I know it's easy I just don't want to do it. I have wired up many stereos and know exactly how to run wires through the firewall.... I just don't want to if I don't have to.

does anyone know if ther is a wire that goes from the ecu harness inside the car up to the ecu harness in the engine bay that I could use for the knock senso by just relocating where the pin is in the harness?

sorry if this is a confusing description, it makes sense to me but that as we all know "makes sense to me" is the start of many arguments

thanks
Sean
 
u can look at obd1 pin out from a p28/p30.
But i have looked in my car(old ecu p06) their were no cables.
Calvinh
 
Back
Top