brian11to1
Senior Member
So a friend of mine and I pulled my motor out of my integra tonight in favor of my B20 Project. After we removed the castle nuts from the LBJ's and seperated the LBJ from the LCA we removed the axles. With the axles completely out I wanted to put the front back together so I would be able to move the car back around into my front driveway. Well, we started the castle nuts adn the only go on so far. They do not tighten all the way. My main concern is will this be enough to push the car around to the front of my house or will it seperate... Or should I just replace the LBJ? Im going to go down and check the stud and nut to make sure the threads are ok and they arent cross threaded. Then ill probably borrow my neighbors industrial Impact and try to do that.
I think Ill put the wheels back on and lower the car down off the JackStands (and then raise it again) to see maybe that will lodge the Stud into the LCA enough to get the Castle nut back on. Im so confused.
I think Ill put the wheels back on and lower the car down off the JackStands (and then raise it again) to see maybe that will lodge the Stud into the LCA enough to get the Castle nut back on. Im so confused.