NEED TO BUY, JDM RHD EG6 PARTS

We may earn a small commission from affiliate links and paid advertisements. Terms

5

5speed4life

Senior Member
ok, im at the dead end i was hoping i wouldnt run into.
Im converting my EG to RHD, and i figured that by the time i needed the parts, i would have them. No luck.

I need alot...

Wiper motor and arms,
the plastic cowl piece,
EVERY WIRE HARNESS UNDER THE DASH... Including the big one that goes from the fusebox to the ecu, then to the headlights.
Gauge Bezel
Climate controll
Clutch pedal assembly
Center console, with the ash tray and cig lighter
And i think thats it. Not 100% sure, but i think so.
 
Originally posted by 5speed4life@Jun 8 2005, 12:02 PM
ok, im at the dead end i was hoping i wouldnt run into.
Im converting my EG to RHD, and i figured that by the time i needed the parts, i would have them. No luck.

I need alot...

Wiper motor and arms,
the plastic cowl piece,
EVERY WIRE HARNESS UNDER THE DASH... Including the big one that goes from the fusebox to the ecu, then to the headlights.
Gauge Bezel
Climate controll
Clutch pedal assembly
Center console, with the ash tray and cig lighter
And i think thats it. Not 100% sure, but i think so.
[post=509659]Quoted post[/post]​
Click to expand...



Oh, also the metal bracket that holds the clutch fluid resivoir.
 
Originally posted by reckedracing@Jun 8 2005, 12:05 PM
this is gonna start to add up quick...
[post=509661]Quoted post[/post]​
Click to expand...

lol... Im just hoping to find another RHD clip, and pick it up in the 3-500 range.
This way, i will have most of the parts i need for a 2nd RHD conversion. lol.
 
You must log in or register to reply here.
Back
Top