No spark, not dizzy, not ground

We may earn a small commission from affiliate links and paid advertisements. Terms

idgeek

Junior Member
I've done a B16a2 swap on my '92 cX.

It started several times and I drove it to the shop for some welding job.
Now the car does not start. there is no spark

The shop tried a good dizzy, but still no spark. I replace the coil, still no spark.

I checked the grounds over and over, everything is good.

The car turns fine, but will not start.

One thing I noticed was that the Tachometer dosen't work after the swap.

Another thing, O2 sensor is not connected yet, but I don't think this has to do with no spark issue.
 
I assume you checked all of the fuses? Might have fried the computer.. It happens on occasion. Try swapping another ecu if you have one handy.
 
Yes, I've tried 3 ecus, matter of fact. Nothing.

I know the ECU fuse is good. I'll check the other fuses as well.
 
Originally posted by idgeek@Aug 21 2005, 07:33 AM
Yes, I've tried 3 ecus, matter of fact. Nothing.

I know the ECU fuse is good. I'll check the other fuses as well.
[post=543066]Quoted post[/post]​

CHECK 4 INJECTOR PULSE........AND GROUNDS
 
Back
Top