OK, here is the problem:
JDM b18c with Toda cams going OBD0 to OBD1
OBD 1 Dizzy
4 wire O2 sensor
OBD 0 injectors with resistor box
Conversion harness (tried three types)
P28 with Hondata & also regular P28 tried both for manuals
This appears to be wired OK and even though I am not a professional I have done some wiring plus checked out by two other experienced mechanics. I get spark and I get 46 psi fuel pressure to the rail. The motor tries to turn over but will not catch and the injectors are not squirting. Does the same with both ECUs.
Any ideas?
JDM b18c with Toda cams going OBD0 to OBD1
OBD 1 Dizzy
4 wire O2 sensor
OBD 0 injectors with resistor box
Conversion harness (tried three types)
P28 with Hondata & also regular P28 tried both for manuals
This appears to be wired OK and even though I am not a professional I have done some wiring plus checked out by two other experienced mechanics. I get spark and I get 46 psi fuel pressure to the rail. The motor tries to turn over but will not catch and the injectors are not squirting. Does the same with both ECUs.
Any ideas?