Push button starter

[drpenguin]

My friend got me a ignited push button to start my car. Problem is i am not sure how to wire that bitch up. Any pointers?

 

[phunky.buddha]

Pick up a factory service manual
Check out the ignition wiring
Bypass the third key position with new wires going to your push button

It's not too difficult to see what parts you need to bridge once you have the ignition module out of the steering column.

 

[hcivic.com]

just cut run a 12v+ from the batt to the switch then to the starter. (or cut the ingnition wire)

 

[phunky.buddha]

I don't think you want all that current running through the passenger compartment, through a puny little switch, and then back out into the engine bay....

 

[hcivic.com]

it not that high of a current under 10 amps it only activates the solinoid it does not power it. This is how everyone i know start our trucks and cars but we only use a 1.25 momentary switch never had a problem yet

 

[Estorvito]

Originally posted by hcivic.com@Nov 25 2004, 03:36 AM
just cut run a 12v+ from the batt to the switch then to the starter. (or cut the ingnition wire)

[post=422031]Quoted post[/post]​

Thats how you do it

 

[drpenguin]

i think im just gonna go with what calesta said. He seems to know his shit around here!