CorysHBB2
Member
This is my first write up so bear with me
The clearcoat has been peeling and yellowing for awhile so i figured it was time to do something about it
I started sanding with 320 grit on a palm sander to completely strip the clear off
I then used a cheap white spray can primer for a guide coat to make sure i got all the 320 scratches out when i sanded with 400 and again with 600
I then wet sanded with 1000 grit as a final sand before clear.
I did my buddys Evo 8 spoiler at the same time
I wiped it down with wax and grease remover and tack clothed it
I used Keystone Euroclear
I had to bust out the tweezers a couple times cuz the damn bugs kept landing in it in between coats. 5 coats later and
My buddys spoiler
Before sanding and buffing
And after
sorry about the quality of the pics all i have is my iphone
DIY link: http://www.clubcivic.com/board/showthread.php?t=63197 http://www.clubcivic.com/board/showthread.php?t=63197http://www.clubcivic.com/board/showthread.php?t=63197
The clearcoat has been peeling and yellowing for awhile so i figured it was time to do something about it
I started sanding with 320 grit on a palm sander to completely strip the clear off
I then used a cheap white spray can primer for a guide coat to make sure i got all the 320 scratches out when i sanded with 400 and again with 600
I then wet sanded with 1000 grit as a final sand before clear.
I did my buddys Evo 8 spoiler at the same time
I wiped it down with wax and grease remover and tack clothed it
I used Keystone Euroclear
I had to bust out the tweezers a couple times cuz the damn bugs kept landing in it in between coats. 5 coats later and
My buddys spoiler
Before sanding and buffing
And after
sorry about the quality of the pics all i have is my iphone
DIY link: http://www.clubcivic.com/board/showthread.php?t=63197 http://www.clubcivic.com/board/showthread.php?t=63197http://www.clubcivic.com/board/showthread.php?t=63197
Last edited: