saturn_boy96
88 C1V1C 53D4N DR1V3R
[edit: uppdated info]
ok here is my setup
b18a1 engine (1991 integra, modified to be obd 1)
1995 gsr tranny
1999 si intermediate shaft
2000 gsr axles
the problem is that the intermediate shaft wont seal with the tranny and it keeps leaking (pouring) out the tranny fluid. i have replaced both seals on the tranny but it keeps on leaking. does any one know for sure that the si and gsr intermediate shafts are the same?
the si one didn't seem to want to work but i used the bolts to suck it onto the block.
ok here is my setup
b18a1 engine (1991 integra, modified to be obd 1)
1995 gsr tranny
1999 si intermediate shaft
2000 gsr axles
the problem is that the intermediate shaft wont seal with the tranny and it keeps leaking (pouring) out the tranny fluid. i have replaced both seals on the tranny but it keeps on leaking. does any one know for sure that the si and gsr intermediate shafts are the same?
the si one didn't seem to want to work but i used the bolts to suck it onto the block.