Guys, I am posting this to give you all a better price on things. This is ONLY for hondaswap.com members.
Fidanza Flywheels, B, D, F/H series - $255 shipped
Fidanza flywheels are made from 6061 T6 aluminum, they are designed to be as light as possible, but at the same time remaining durable. The friction surface is made of a very special 1050 high carbon alloy steel which allows the use of about any clutch material. Aluminum flywheels have been used for many years for increasing performance, from the earliest days of racing and street build-ups, the world’s best engine builders have been using aluminum flywheels to give their engines the needed edge. A lighter flywheel will reduce the rotational mass on your crankshaft.
7.5-8 lbs comes new and with hardware kit, ready to bolt up and go!
FMIC: super nice, Core Length : 24" (600mm) Core Height: 9" (230mm) Core Thickness: 3" (750mm) Inlet Size: 2" o/d (50mm) Outlet Size: 2.5" o/d (650mm) "End to End" Length: 30.5" (770mm) These intercoolers are 100% aluminum tube & fin design, with the highest quality hand welded and then hand polished construction. Made in Japan. $475 Shipped
Exhaust piping: Mandrel Bent Piping running from your cat to your muffler, aka the "B-pipe". Included with the piping is the needed hardware (all flanged, gaskets, and hangers necessary). Custom setups are available in 2.25", 2.50" or 3". Available in 100% stainless steel, or aluminized steel. These are made for just about EVERY honda/acura. please specify your car's make/model.
Aluminized 2 1/4" - $165
Aluminized 2 1/2" - $165
Aluminized 3" - $180
Stainless 2 1/4" - $195
Stainless 2 1/2" - $195
Stainless 3" - $205
I'm not sure if shipping IS or ISN'T included in this price. please ask when ordering
(picture is for a civic... your application may have different bends)
please contact: Mike
TELL HIM YOU SAW IT ON HONDASWAP.COM
Fidanza Flywheels, B, D, F/H series - $255 shipped
Fidanza flywheels are made from 6061 T6 aluminum, they are designed to be as light as possible, but at the same time remaining durable. The friction surface is made of a very special 1050 high carbon alloy steel which allows the use of about any clutch material. Aluminum flywheels have been used for many years for increasing performance, from the earliest days of racing and street build-ups, the world’s best engine builders have been using aluminum flywheels to give their engines the needed edge. A lighter flywheel will reduce the rotational mass on your crankshaft.
7.5-8 lbs comes new and with hardware kit, ready to bolt up and go!
FMIC: super nice, Core Length : 24" (600mm) Core Height: 9" (230mm) Core Thickness: 3" (750mm) Inlet Size: 2" o/d (50mm) Outlet Size: 2.5" o/d (650mm) "End to End" Length: 30.5" (770mm) These intercoolers are 100% aluminum tube & fin design, with the highest quality hand welded and then hand polished construction. Made in Japan. $475 Shipped
Exhaust piping: Mandrel Bent Piping running from your cat to your muffler, aka the "B-pipe". Included with the piping is the needed hardware (all flanged, gaskets, and hangers necessary). Custom setups are available in 2.25", 2.50" or 3". Available in 100% stainless steel, or aluminized steel. These are made for just about EVERY honda/acura. please specify your car's make/model.
Aluminized 2 1/4" - $165
Aluminized 2 1/2" - $165
Aluminized 3" - $180
Stainless 2 1/4" - $195
Stainless 2 1/2" - $195
Stainless 3" - $205
I'm not sure if shipping IS or ISN'T included in this price. please ask when ordering
(picture is for a civic... your application may have different bends)
please contact: Mike
TELL HIM YOU SAW IT ON HONDASWAP.COM