We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by gount175@Oct 5 2004, 04:24 PM
thanx calesta....or should i get different rods??....im trying to build an ls vtec and i wanna build it right....what do u suggest??
[post=398679]Quoted post[/post]
Our LS/VTEC did 13.2 at the track when it was pulling down 180 HP at the wheels...............And to you people who don't think stock rods are good...we are using STOCK LS rods with no shot peening and the rev limiter is at 8600 RPM. We have hit that mark hundreds of times. And this car drove to Sacramento (8 hours each way) raced, then drove all the way home with no incident. How is that for reliability?
Originally posted by civicious@Oct 6 2004, 04:00 PM
import builders made 180 whp on stock ls rods
http://www.importreview.com/reviews/lsvtec.html
Our LS/VTEC did 13.2 at the track when it was pulling down 180 HP at the wheels...............And to you people who don't think stock rods are good...we are using STOCK LS rods with no shot peening and the rev limiter is at 8600 RPM. We have hit that mark hundreds of times. And this car drove to Sacramento (8 hours each way) raced, then drove all the way home with no incident. How is that for reliability?
edit: but you should buy Cal's rods anyways, and give them to me.
[post=399161]Quoted post[/post]
Originally posted by civicious+Oct 6 2004, 04:00 PM-->but you should buy Cal's rods anyways, and give them to me.
[post=399161]Quoted post[/post]
You can buy them direct- easier.
AllMotorMonster@Oct 6 2004, 06:05 PM
I'll bet $ to cents that those stock rods at least had ARP rod bolts.
[post=399232]Quoted post[/post]
Originally posted by Calesta+Oct 7 2004, 07:17 PM-->civicious@Oct 6 2004, 04:00 PM
but you should buy Cal's rods anyways, and give them to me.
[post=399161]Quoted post[/post]
You can buy them direct- easier.
[post=399722]Quoted post[/post]
Originally posted by CRseX84@Oct 7 2004, 06:03 PM
im sory im not tryin to steal ur thred. but im puttin GSR pistons on my ls rods, will those go on no prob? if the Type R pistons wont then i dono if mine wil... ?
[post=399754]Quoted post[/post]
Originally posted by civicious+Oct 8 2004, 12:15 AM-->Originally posted by Calesta@Oct 7 2004, 07:17 PM
civicious@Oct 6 2004, 04:00 PM
but you should buy Cal's rods anyways, and give them to me.
[post=399161]Quoted post[/post]
You can buy them direct- easier.
[post=399722]Quoted post[/post]
easier, but not cheaper (for me at least)
[post=399893]Quoted post[/post]
Originally posted by gount175@Oct 12 2004, 02:28 AM
how about gs-r rods/ type r pistons combo?? also whats up with those type r oil squirters??...could i put them on my ls/vtec or should i just just forget it and stop asking so many questions?
[post=401490]Quoted post[/post]
Originally posted by gount175@Oct 12 2004, 03:35 PM
last question.....will the gsr rods/ itr piston combo bolt right into the ls block?? and is it good for ls/vtec??
[post=401762]Quoted post[/post]