Recent content by snozepp147

hey, i'm rewiring my alternator from obd1 to obd2 but i need to know the pin info for repining it. the obd1 wire colors are black/yellow, white/blue, white/yellow, blue and the obd2 wire colors are black/yellow, white/blue, white/green, and white/red if anyone has done this or knows the...

hey, i'm wiring up my jdm b16a with my d16y8 harness. most of the stuff is plug and play but i don't know what this one sensor is. its below the intake manifold and right below the knock sensor, to the upper left of the oil filter and right above the oil pressure sensor. its got 2 pins. here's...

awesome. thanks.

so i wouldn't have to re-pin the dizzy plug? just plug it into the obd2 harness?

karma....

bump, anyone know?

bump

does anyone know?

ok i have a question about my swap: its a jdm b16a obd1 going into a 98 civic ex obd2. the engine came with an obd1 dizzy from a 92-95 integra which is obvious because the motor is out of a 90-93 jdm teg. the guy who sold me the motor included a brand new dizzy from a 96-00 gsr (obd2). so my...

hey, i'm doing this swap also only with an SiR I jdm b16a into an ek. can anyone verify exactly what i need to keep my A/C and power steering? what parts do i keep from my d16y8 and what do i get from an integra or si? this information would be helpful to other viewers also. thanks in advance

i'm doing a swap for the first time and i got a jdm b16a sir1 to go into my 98 ex. i did get the obd2-obd1 conversion harness for the ecu's. my question is: with the ecu converted, will the wiring be very hard using my stock 98 ex harness to hook up to the b16a? does anyone know of any step by...