Recent content by vxn12

Sorry for the confusion. I test drove the car. My Speedo is working fine. My tach is not working. Radnulb, are you sure there is no tach output on the OBD2 distributor? Maybe this explains why my tach isn't working. Can you give me more info on how to add a tach output. Do I just tap off the...

pissedoffsol, I still have the problem. I double, triple checked my wiring. I haven't touched my dash at all. Tach was working before the swap. Now it's not. Could this be somehow related to my engine running rich? My car is exhausting alot of black smoke. Could this be related to the...

Thanks for the replies. I have taken some measurements of what needs to be done to make the integra linkage work. It looks like the teg linkage needs to be lengthen by 1.5" (on both rods) and bent down about 1.25" on one rod and 2.25" on the other rod. I think this will work. I'm asking a friend...

Hi, My speedometer tachometer isn't working when I swap to the B18B engine from an 01 Integra. I used the OBD1 ecu. Any ideas?? Thanks!

I read somewhere that the B18b shift linkage will not work on a del sol, I guess I need get a Del sol Vtec shift linkage. As for the vacuum hoses, how do you bypass the canister? I have 2 hoses that suppose to plug in the intake manifold on the D16, but I can't find where they should go on the...

Hi, I am swapping a B18B out of an 01 integra into a '94 Del Sol. Got almost everything bolted-in, except for the shift linkage. The linkage that came out of the 01 integra is about an inch shorter than what I need. Can someone confirm this? I have been told that the B18B shift linkage should...

Thanks E_SolSi! Ok, so I need to buy an OBD1 LS ECU and plug it into the wire harness that came w/ the engine (eventhough the harness is for an OBD2 engine). It should work, right? Is there anything else I need to change on the harness to make it plug into the OBD1 LS ECU? Thanks again. Sorry...

Hi Guys, I will be swapping a B18b (from an 01 Integra) into a '94 Del Sol next week. I need some advice/instructions. I need to know what I have to do as far as ECU and wiring. The B18 comes with the original wire harness and the OBD 2 ECU. But I don't think it's no good to use them, right? If...