Drop in a Browntop carbed DOHC ZC. It's a bolt in swap and is your best bet for a swap. Check out http://www.redpepperracing.com/forums/index.php? for further details. Oh yeah, forget the A20.
Failed again, this time the Hydrocarbons are lower 148 ppm vs. 316 ppm. However, the Carbon Monoxide went up 2.71 % vs. 1.02 %. I'm leaning towards changing the O2 sensors and then the convertor. I will test the O2 sensors again to see if the voltages meet specs. If not I will replace the...
I'm interested inthis as well since I am in the market for shocks. I have a CRX that I am going to use eibach prokit springs with. This will give me incresed suspension travel. can these be only used on the front or can I buy accord shocks all around. Anyone have any links with anymore info...
Guess I should have came here sooner. I'm known for skipping steps and what not. Thanks, for the help. I actually did have a kid at work check the timing when it first failed. Clearly he did it wrong since the timing was almost fully advanced. Maybe he was using the white mark to set it...
I'm starting to get frustrated with my CRX because I can't get this thing to run properly. I took it for an emissions test here in Canada and it won't pass. What's worse is I can't drive it until it passes.
The car failed with excessive HC (hydrocarbons) and excessive CO (carbon Monoxide)...
Can somebody tell me what PCV valve a first gen B16a takes. Mine is plugged and my car won't pass the emissions test (smog). Stupid Canadian tire doesn't stock anything that looks like my old one so I'll order a new one tomorrow. Thanks.
You have to use the 86-89 Integra knuckle and hub assemblies. The 91 Integra ones will not work. You will also need to make hybrid axlesof some sort. I never got far enough in my swap to find out the length that the shafts have to be but HASport makes shafts and complete axles. If you buy...
90awdraleigh: Could you let me know wht you find out with your car because my B16 CRX is running rich as well. My number 2 cylinder is flooded. I'm gonna try new spark plugs to start off then with the injector and fuel pressure regulator. But make sure your timing is right and that there are...
I'm gonna swap the injectors out in my CRX for some injectors off of a spare motor. I would like to put new o-rings in. What o-rings do I need to get? Are the for 99-00 Civic Sir (Si), a 90 Integra? If anyone knows please let me know.
To convert to fuel injection you should start by using parts from a CRX Si the same year as yours and then go from there. Therfore I would get the entire engine wiring harness, gas tank and lines. Either buy new lines from Honda or make your own. Now I'm not sure if the Hasport wiring harness...
Thanks guys. The silicone for the hoses is a good idea that I didn't even think of. I wanna do a couple things on it today since I got home early from work. I also have water on the drivers side floor any well known areas for leaks? Do the drains for the sunroof get clogged? I would like to...
I will be letting my CRX sit for most of the winter. When I have a little time I will try to sort out the emissions problem but it will basically stay sitting in one spot for quite a few months. The e brake already needs to be fixed. What should I do to save the tires. I was thinking of...
Sorry, It's a 1990 Honda CRX Si w/ first gen JDM B16A. It is running rough and it failed the emissions test (smog test). The results were very high Hydrocarbons and very high Carbon Monoxide. Well running rough is kind of an understatement. Anyway, the car is running way too rich. I've...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.