Search results for query: *

when i have a stripped bolt hole sometimes the tap will not start because there is nothing there to start it into and you can not turn a ratchet that fast to start it try useing an impact gun or an air ratchet on the tap when it starts run it about half way in then...

anyone help??

ok so i bought a bosch 4 wire o2 sensor hooked all the wires to where boomslang told me to on there subharness and still no fixa problem?? could it be in the ecu??? what next any ideas ?? its throwing the code for o2 sensor heater i hate bugs!!!! other then that the car hauls ass

put the gsr motor into a 90 crx si the wires were raw on the o2 sensor when i first started it there was no codes but while it was running the wires on the 02 sensor touched and now i get code 41 for the o2 heater circuit would you say i shorted out the heater in the o2 or did i do more damage...

fuel pump wont effect the way its running the o2 sensor will every since i started with the 41 code my car is running rich and rough get it running right first then upgrade the fuel filter it dont matter how much fuel you put to the injectors they are still going to pump the same amount of...

what kind of exhust do you have? when i only had the exhust manifold and the cat on with no pipe out the back it reved up fast but since adding the pipe its godly slow seems to me the o2 would have something to do with the way it runs\ chris

the phone numbers for them have been disconnected dont waste your money they are scamming people left and right the website will still take your money but no one will ship the product

i touched the wires together on accident on my o2 sensor while the car was running and now im getting the same code 41 so im going to try and change the o2 out for a new one just thought its some info you could use it might be a bad o2 or a wire grounding out some where chris

one o2 sensor its in the cat converter i used stock exhust manifold and cat converter i wired my o2 up where it was at i dont know what wires to tell you where they go because the harness i bought from boomslang had there own colors and instructions for wireing chris both codes 02 sensor

just put a 95 gsr motor into a 90 crx si if its one long cel its heated oxygen sensor #1 if its 41 its heated oxygen sensor are you useing the four wire o2 sensor? i used my crx si engine harness added all the obd1 plugs then bought a jumper harness from boomslang and car runs great no check...

there is a post on honda-tech to alot of people have been screwed one person said class action lawsuit beleve me im down my bank is sending papers out right now to get my money back but im sure there are alot of others? i have no love for people who screw people over

seems like from what ive found out at a couple of other forums landspeed has screwed more then one person over so i guess im out of my money thieves suck :angry: i should take my next vacation in az and go see these guys

anyone know any sites i can buy a new hasport linkage from to put a b18c1 into a 90 crx i orderd one from landspeedracing.com because they said they had one when i called to ask them where it was they said they had to order it that was jan 21 called last monday they said its been shipped...

im putting a 95 gsr motor in a 90 crx si i have been working on the engine harness for like half the day now swapping obd-0 connectors to obd-1 now im at the injector resistor box i have the 8 wire cap off off of the obd-1 harness my ? does the red/black wire connect to all the yellow and black...

crack must be really bad in those areas or else dude took an abundance of it wonder if its got vtec??

if you have an air compresser go to walmart buy an air chisel about 35.00 it should have a punch with it and the pin will drive right out and you have an air chisel that is good to use for anything chris

did not say the man was a theif or the parts are stolen just saying there are post that say that even if they are stolen and you know about it you would still buy it??? \ had a 93 mustang once 4cyl i bought a stolen motor 302 and did a motor swap on it two...

thats pretty good you would buy stolen parts from some one to put on your car from a thief or someone that knows a thief but heres the real ?????? how would you feel if it was your car that that motor came out of just disagree with stolen parts i see alot of people crying on hondaswap about...

they cold have knocked some wires loose while putting the new filter on??