Search results for query: *

Hey, thanks for the replies...Just so you guys know, I'm not chosing the b16 head over the gsr for performance reasons. My timing belt broke on my gsr and I don't have the cash to build the gsr head the way I want right now. I know a friend getting out of the honda scene and he had a PnP b16...

I am going to be putting a b16 head on a gsr block and have a few questions. I need to use a gsr timing belt because the gsr is physically taller, right? As for head gasket I have read that the b16 and b18c's are the same, not sure though?? And, lastly will the stock gsr ecu (P72, I believe)...

I thought honda motors were interference too. I have seen some people that snap belts and have no damage and some people snap belts that have to redo the head so I guess I'll have to take it apart and see. I wasn't revving high when the car died maybe 2.5k-3k rpms, if that. But I guess I'll...

Finally got to work on the car. Took the cap off and had my brother crank the engine and the rotor just sat there. No movement. OK, so the timing belt snapped. What next?

B16: after I checked the coil I replaced it anyway. I had a couple extra laying around. I get yelled at on a regular basis from my family about having a honda junkyard. lol. Hopefully today or tomm (weather permitting) I'll get to take the cap off and see if the rotor turns. Hopefully that...

A little off topic but what do you guys think of a gsr trans with a lower ratio final drive for highway/top end pulls. I saw something from sage racing a while back. I think it was 4.0x. I don't remember the last digit. Just curios.

The last few days I have been thinking about the possibility of the timing belt being broken. The last time I worked on the car I checked again and the dist has power to it and the coil ohms out. I checked the timing belt about 3 months ago after I bought it and it looked okay but you never...

Any other ideas? Thanks...

Thanks for the reply, in my post I said I replaced the ignitor. Ignitor to me is the ignition control module/ICM. Anyways I replaced that too.

Fisrt off, sorry for posting another "car won't start" post but I can't figure out what to check next. Here goes, I was driving normally, then the tach dropped and it crapped out. Pulled over tried to restart but just cranking (at a normal speed). After I pushed the car about 2 miles, I...

I thought it was 16 but just wanted to double check. Thanks, I appreciate it guys.

What is the stock timing of an obd1 b18c?

Thanks for the info...I have some spare parts still laying around from my d15/d16's and wasn't sure if the ignitor would work in the b18c and I was kinda nervous about just trying to plug it in. On another note, I didn't know you could bypass the igniter/ICM with an aftermarket ignition...

I have an obd1 b18c with a bad ignitor. Do any other obd1 ignitors (integra LS or 1.5/1.6 honda) work, or is it specific for the b18c? Thanks...

This is probably a stupid question but does anyone know how to remove the film and haze from the outside of a headlight lense? I read about nail polish remover with acetone but it did nothing. If anything it made it worse. I have heard about plastic polishes but can't find them anywhere...

Thanks everybody for the input. I'm going to get a high flow unit and I'll do some more research with the manufacturers. By the way, it is a gsr. One last header question. Is getting a stainless steel header worth the extra cash over mild steel or ceramic? If i do get it in ss should I wrap...

Thanks for the info. I wish there were no emissions here (NJ). I used to have a 92 civic sedan and I swear the dmv spot checks would follow me around. I've had my car inspected with mirrors to look for a cat a few times. With that said, I'll be running a cat. E_SolSi: I looked into...

I am planning on getting a header with a 2.5 collector and was wondering if the stock cat can be modified by a muffler shop or would I just have to run a custom test pipe? Also is the 2 door integra cat different from the 4 door?

Thanks for the reply. I figured the spring rates would be off. Is it safer getting springs specifically for the integra? Everything is brand new. I built complete spring/shock combo so I could just replace them in the civc but never got the chance. Also since I have all brand new upper...

This is probably a common sense question but just making sure. Will suspension components from a 92-95 civic fit and support a 94+ integra? Springs/shocks, sway bars, strut bars, upper strut mounts. I'm replacing my eg sedan with an integra sedan. Also will the weight difference be too much...