This is off of my Y8 swap and for some reason there is an obd1 Z6 Intake manifold on there with this line.
On my Z6 the line goes where I have pointed out, but the Y8 as you can see already has a hose going from the FITV to under the intake manifold.
Where can I direct this coolant line or...
I'm trying to compare it to my D16Z6 in my EG and it has that T pipe that runs all the lines together from the top of the valve cover and the line pictured and they go 1 into the intake and 1 into the FITV. On my Y8 I'm using the Z6 intake manifold but the FITV already has a hose going under...
Just did the y8 swap back in my 98 ex. It starts up just fine but has an idle problem. It surges up and down really fast. It has the IAC code 14. I'm using the P2P ECU and I also have an OBD2 P72 I've been trying to see if it runs any better.
I noticed it's a complete y8 swap with obd2...
Are the 92-95 and 96-00 rear T brackets the same? I have a D16y8 im putting back in my 97 ex coupe and I can't get the drivers side mount to line up, I'm using the 92-95 T bracket but if they're different then that must be the prob.
I have a wire on my sohc obd2 harness for the knock sensor I thought only B series had that but I must be mistaken. There is no sensor on the back of the block for it though so I will definately have to get it somewhere right? otherwise it will throw a code?
One other ? are the rear...
I will probably just piece together a brake kit with some larger flat surface rotors maybe 11" and some bigger calipers. I wonder if brembo or other name brand brake companies just sell the caliper.
Will I be able to fit a decent brake upgrade kit on my eg hatch if i went with 15x6.5s? If not I'll have to go with 16s, but I like 15s because I was going to go with the bf goodrich drag radials and I dont see them making 16" tires i only see Nitto and mickey thompsons in 16s.
I would need to upgrade the braking system for my turbo none of it would be for show. I think I am just going to do the rear discs from a civic at the junkyard and run new lines. Probably upgrade the 4 rotors to 11" or whatever fits inside of a 15" wheel and some bigger calipers maybe those...
I have a 94 VX and with front discs, rear drums. Swapping in a turbo GSR and I am looking for a big brake kit that will fit inside of a 16x7" wheel. I know a lot of people just do the gsr disc conversion or even the ex/si rear disc conversion but wouldnt that be a waste of money since I am...
What do you guys think about Omni power race coilovers, Omnipower sells package deals with camber arms front and rear, adjustable ball joints and rear LCAs all for around 900 and thats the cost of some race coilovers alone. Sounds like the quality may not be as good as others does anyone have...
Im deciding on suspension for my hatch and don't know the first thing about it, it will be putting down 450 whp not going to be a daily driver, mostly track and strip. I've already got traction bars, urethane bushings sway bars and strut bars.
I'm thinking about preloading, probably slammed...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.