Search results

  1. SpoonTuNed

    Oil in cylinders??

    True, What can i do to get it runnin again?
  2. SpoonTuNed

    Oil in cylinders??

    The only reason i thought it was a head gasket was that there was oil deposits all around where the head meets the block. Another thing the motor is a jdm gsr and when i pulled the head there were forged low compression pistons.
  3. SpoonTuNed

    Oil in cylinders??

    I just bought a civic that smokes like no other. I noticed that oil was dripping out of the header between where it bolts to the cat. I pulled the head to see if maybe it was the head gasket and there was like a pool of oil in each cylinder on top of the pistons. What could cause this? Im...
  4. SpoonTuNed

    CYP sensor?

    Im throwin a code 9 which is for cyp sensor. What the heck causes that and how do i fix it?
  5. SpoonTuNed

    eg city lights

    Wont they blink then, or are there seperate power supplies for the blinker and park lightS?
  6. SpoonTuNed

    Pin out for shock tower plugs

    Is there a pinout for the plugs by the shock tower on here or does any one know where i can find them? thanks
  7. SpoonTuNed

    LS final drive ring gear in B16 tranny

    Yea thats what i did, Does anyone know what the torque spec is on the nut on the counter shaft?
  8. SpoonTuNed

    LS final drive ring gear in B16 tranny

    hehehe....my bad the b16 has 66 teeth.
  9. SpoonTuNed

    LS final drive ring gear in B16 tranny

    The ring gear im using is out of a 96 and i know their different because of the tooth count.
  10. SpoonTuNed

    LS final drive ring gear in B16 tranny

    I recently bought a 99 si tranny with a bad ring gear ( the one that bolts to the diff), and was wondering what would happen to the gear ratios if i put a ring gear out of a ls in it, i know that a ls has 64 teeth on the ring and b16 has 66, and the counter shafts both have 15 teeth on em. Any...
  11. SpoonTuNed

    CTR pistons in B18b1

    yea i guess its in the air, anyways if you could help me out that'd be great cause im not just kickin tires i actually have my block and pistons going to the machine shop tomorrow. thanks Never mind i figured it out....thanks
  12. SpoonTuNed

    ctr intake cam with gsr ex

    Ive done it before, That motor screamed for some reason. I was grabbin gears so hard i broke my cd player...no joke...and it was on a almost stock exedy clutch. If you do it just advance your intake cam slightly thats what i did and it worked out pretty good.
  13. SpoonTuNed

    CTR pistons in B18b1

    Im sure this question has already been answered but im lazy and dont feel like looking around for it, any ways will the ctr piston fit on a ls rod with out mods? If so will it clear the valves of the ls head? That is all. Im going for a all motor ls so if anyone knows anything or has any...
  14. SpoonTuNed

    FS: 1998 Acura Integra Stock parts

    ...So about those rear brakes...Also is the shift linkage available?
  15. SpoonTuNed

    FS: 1998 Acura Integra Stock parts

    How much for the rear disc setup?
  16. SpoonTuNed

    wtb-z6 tranny

    $250 if your still interested. thanks
  17. SpoonTuNed

    wtb-z6 tranny

    I have a z6 tranny its a 95 shift smoothly no grinds AT ALL! has new clutch with it also, If your still lookin for one hit me up im also in nor cal, paradise to be exact, let me know, thanks KAM_B16@hotmail.com
  18. SpoonTuNed

    FS: b16 hydro tranny

    you still have the tranny? where in cali are you?
  19. SpoonTuNed

    CA: civic si f/s $6000 firm

    My bad its a 2000 civic si.....hahahahaha
  20. SpoonTuNed

    CA: civic si f/s $6000 firm

    2000 civic Si 95,140 miles 5 spd. Flamenco black pearl spoiler 04 civic ex wheels w/ brand new 195/55/15 falken zexius tires greddy exhaust dc header ground control coilovers pioneer cd player with allpine speakers mb quart tweeters nice condition, minor dent on trunk lid other than...
  21. Try your Search on Google

Back
Top