Search results for query: *

How would that be possible if Im running a 3.5bar map?The plugs are diff.

Well I put a diff Iac on there too..Its stumping me cause everytime I put a tps sensor on I recalibrate the aem ems to it then when it starts to idle high again I go in the aem and look and the tps is reading something diff..Almost like its changing volages on its own..The crank angle sensor or...

I am having a problem with my car staying idled at 1000rpms..It wants to idle up to 2000rpms and some times fluctuates back and forth..I am running a Aem ems management system and I replaced the tps sensor and it Idled fine till I got on it then it comes back..I have made sure the ems is...

But my cams are exactly the same I have compared them with b17 cams in person and they are not b17 The groove on a b17 cam is not as deep as the cams he has and I have!!

They look close but I dont think they are b17 cams I have the same ones and cant figure out what they are..But if you look the intake and exhaust cams have diff lines...

Ok but not a noob Ive been a member of this site for a while now..I just dont post much because usually I dont have questions!I didnt ask which one had bigger lift I ask HOW TO TELL THEM APART and if Im loosing anything If I have b16 cams..So you tell me smarty where that question says What kind...

Thanks for your info and help..I appreciate it.

Stupid question?Sorry but maybe you have the wrong impression..A forum is for question For people that KNOW something to answer..If you thinks its stupid dont post!!I have searched also on here and other forums and came up with nothing I dont have the time to read a million posts to find the...

People dont have to be smart asses..Why cant I get an intelligent answer from a grown individual?I wasnt talking bout the cam gears anyways I want to know about the cams who cares about the cam gears..I have just heard that the gsr cams have a diff overlap than b16's and are better on turbo'd...

Hey I bought a civic with a gsr swap and turbo'd it the question I have is that when I went to replace the timing belt and such I noticed the cam gears say pr3 on them..So my question is there a way to tell b16 cams from gsr cams also If they are b16 cams am I loosing anything over the gsr...

I have he AEM uego wideband and it reads that the a/f's are perfect 12.8 till 4800 then 11.1 from 4800 till 8500..

Iam at FULL boost around 4300..If it was the turbo not making boost till 5500 then it would be smoother But believe me when I say the turbo is already spooled by then..

How do you check to see if the wastegate seal is leaking?Why would boost kick in all the sudden at 5500rpms if there was a leak?

Ok I have a Gsr turbo'd with CP 9:1 comp pistons, Eagle H beam rods, Walbro 255, 3 Bar map, RC 550's, SC61 turbo, Neukin ramhorn manifold and 3" downpipe, Tial 38mm wastegate, AEM EMS. Now my question is I had my car tuned with a inline pro cast manifold and 2.5 inch exhaust..I upgraded to the...

I have a b18c1 I was going to replace the timing belt and bought a gsr timing belt come to find out it was too big so I bought a LS timing belt and it fit what would make a gsr timing belt be too big?Next question is will this throw off my timing at all?

Hey I have a 00 civic si with a b18c1 turbo.I put a act 6 puck sprung clutch in with a fidanza flywheel and when I engage the clutch the motor jumps and hops bad (it vibrates the car).I have put many clutchs in but never had one do this.Someone with experiance with this let me know..

I have a b18c1 complete motor and went to change the timing belt etc. With oem timing belt for a b18c1.But the timing belt is too long what could be the problem?I compared the old timing belt with the one I bought and the old one is shorter.So I called a friend with a b16 and compared the old...

Ok so I can use a 81mm oem honda gasket on a 81.5mm bore right?

Where is a good place to get an 81.5mm head gasket can you get it from a dealer or where?

Yeah if its not the distributor its the tach.