Is the 90 integra same as 92? My friend wants to swap the b18b1 engine into a 92. I got the engine out of a 95 Teg LS. I have the axels, harness, axels from the 95. If its the same as the 90 then I know what I need. If not, then what would I need?
Well the idle happens every now and then, not always...so thats not a big concern to me. If it was revving up too high yeah but its only alittle.
Unfortunally I dont have the code reader, I would have to go to a shop and pay to get a read. Im not sure but it might be because on the headers that...
OBD2 ECU OBD2 Motor on 95 Civic Dx. I did the entire swap already.
I got everything in there. I dont know for what reason the starter went bad during the swap. That wouldnt let me start the car.
But i got a new starter and ran only vtec solenoid and vtec pressure and the car is working fine...
Im using a GSR OBD 2 from a 99. I just found out today that the alternator plug was different, luckly i had a harness from a 95 ls and switched the plugs.
Now I was told that my car would start without the Vtec wires hooked up, vtec is optional. But I plugged must and i couldnt get it to start...
Hey guys, So far my swap has been a headache. Right now im stock at the end of the swap. I was told my car wouldnt start without me wiring the vtec. I was also told that Vtec is optional. Have not checked if its true or not. Will be checking tomorrow. Now, I need help with some stupid things...
Hey guys, So far my swap has been a headache. Right now im stock at the end of the swap. I was told my car wouldnt start without me wiring the vtec. Have not checked if its true or not. Will be checking tomorrow. Now, I need help with some stupid things such as wiring the vtec.
I already know...
bump...
I got the ECU Diagram, the color code for the wires, But!!! I need the diagrams for the gsr obd2 harness. I need to make sure that im doing it right since im no mechanic, I dont know where all the sensors and switches on the engine are.
Ok I got all the info about the pinning out stuff. Vtec!
Vtec!
Question, Does anyone know of a good place to buy the materials? Color cables to try and keep it original. Also Whats the name of the small clamps/clips you attach to the cables to hook it up to the ECU harness??? It would help a lot...
Im selling a b18b1 engine, that I purchased to swap into a civic. But got a better deal on a b18c1 So I'm selling this one for whatever I can get.
I took it out my self from a guys' integra that was missing the rear end (wrecked).
It runs great, I did all the testing I could before pulling it...
Im working on the same swap, but i wasnt lucky enough because I have a DX, i need to wire up the vtec witch sounds like a b@#$@ch. I also for the budget have a LS tranny.
:confused:Ive seen all kinds of diagrams. But I cant find the right one that will tell me what to do. I have a 98 B18C1 P72 into a 95 Civic couple DX. Does anyone know the diagram to to wire up the Vtec? I will be very happy if you can help me, since i'm in the middle of the swap as I type.
I...
Hey, Im selling a OBD2 B18B1. Its ready to pop in your engine bay. I didn't remove anything from it, it was running when I pulled it out.
Engine harness sold separately.
It had 82,xxx when I pulled it out from a rear ended wrecked Teg.
I'm actioning it on ebay aswell but If I get a nice offer...
Ok, Tomorrow is the big day. SWAP Day!
Now, Im going to start selling all left over parts. I got the wiring harness off the 92 integra with the GSR OBD2 Engine. I need help on giving it a title since I dont know what type of cars would take it.
It looks like it was wired for Vtech. Any sudgestions?
Welfare has helped me alot with this virtual swap.
I just want to be ready and not have any delays when I take my civic apart, since its my only reliable ride.
I thought about getting a new clutch, but its starting to get too costy on me. Plus the guy who sold me the tranny said he had...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.