Search results for query: *

I will not be able to work on the car until friday but I will definetly go back and advise Thanks a lot

<p> </p> <p>&nbsp;</p> I actually follow this link when I made the 5 speed swap in fact I even post this link here before, but I guess I did something wrong so I will check my work again

I made a 5 speed swap and I belived that the shift wiring is wrong... I am not able to start the car, the starter and battery are new... Do anyone has A easy dIY or how to do the shifting wiring on a 96 EJ D16Y8... I put on a manual engine harness...

The starter and the Batery are new and still not able to start the car?

I took the starter to autozone and is not good... I purchase a rebuilt unit online and was delivered today... I am on my way home to try it...

I believed the dizzy is not getting power... I will go over the wiring of the 5 speed swap but I am almost sure that I made something wrong... What should I need to look for to. Made sure that the dizzy is getting power? What wires I need to put together when doing the 5 speed swap?

No problem,,,, these bloopers are always needed to keep it fun...

Yeah, maybe but, also are Homos! Those that reply to the wrong thread. IACV not the AC

tomorrow I will be able to spend some quality time on the car and try to made this happend... After so much time i am dying to hear this car sound...

Ok guys, the crank it moves... its not like butter when I turn it but its not stuck either...

Ok guys sorry for the delay but I just came from work, the battery is new, the starter is used and right now I am going to try to turn the crank... and when i was trying to start the car nothing it moves at all just the sound of TAK, TAK... So let me try to move the crank and I will came back...

It take about a second to do exactly TAK, TAK... I will defenetly going to check the grounds and if can't find anything missing then I will look for another starter... Before bought another starter how can I know for sure that my die?

<p>I am at work right now, but as soon I get home I will check on that... The motor its suppose to turn, I mean it got it from the machine shop after getting new pistons rods and a block guard...</p>

I need help with my D16Y8 project I am trying to start the car after 4 years. Everything under the hood its new includind a tranny swap... When I try to start the engine it makes only a sound like TAK TAK and there is no sign of starting at all. I was thinking a bad starter.</p>

<p>I will try that when I get home... It has to b that, right? If it is how can I fix it?</p>

Fuse are good... What else could be?

It has a fuse for each side?

I got this issue with the driver side... The High Beam on the driver side dont work, low beam work fine on both sides but the high beam only works on the passenger side... The bulbs are new and I even switch them just to make sure that was not the bulb.

There is nothing wrong.. what happend is that I build my D16 from scratch including a tranny swap and those two hoses basically just go in and out from the IACV and don't understand why antifreeze has to travel under the IACV? Tomorrow I will try to started the car after 4 years and I'm just...

What is suppose to run thru the hoses that connect to the iacv? Air or antifreeze?