Search results for query: *

Ok, I did some research. Here is what I found that I need. EG/DC/EK K-Series Axles - Axle Level Level 2.9 - 475hp EG/DC K-Series Mount Kit - Urethane Durometer Street (62A) DC Sports (AHR6516) K-Series Swap Header 94-01 Integra (DC) K-Series AC Line Kit AEM (25-111) K-Series Fuel Rail - Color...

I'm planning to put a K20-R in my 2000 Integra gsr. I have a type-r 5-bolt brake conversion. I want to get the big picture before starting do buy stuff. What do I need to do the whole swap? -Complete Engine -Transmission and linkage -ECU -Engine Wirring Harness -Intake/Exhaust Manifold...

Ok cool! We'll take a look at it. Thanks

Thx! I can't wait to try them next summer! And thx again for the help!

All good, the 5bolt is on. The axles fitted perfectly on both ends. There is a huge difference en brake size! Thanks for the help! Here are some pics, sorry the car is not too clean, I had to drive it in slush (dunno if it the right word but it means when snow is mixed with rain). Now the car...

But there is no check engine light ON. Or is it something else?

Hi, My friend has an Acura 1.6EL 1998. It has the same engine as a Civc SI. His car will go dead from time to time for no apperent reason and he can't get to restart it for a couple of minutes afterwards. After a couple of retrys the car will start up and run great. When the engine runs, the...

All right, I'm going to get them tomorow morning. I'll see if it fits. Thanks

Axles, thanks! Well that's it. I bought Type-R hubs for my GS-R. My GS-R axles are too small and they are loose in the hub Type-R hubs. I got specs that Type-R axles are 36mm GS-R/SIR are 32mm wide on the the 'hub' end. But are the 'transmission' end the same size?

Well you see, I write and speek primarly in french. So i don't really know what is the actual name in english for what I reffered as a "cardan joint". In french it's a "cardan". When I translated it at babelfish.altavista.com, it gave me "cardan joint". :confused: So, what I mean is the part...

As the title says... Does a Type-R Cardan Joint fit in a Gs-r Tranny? THaNks!

?

I'm putting a ITR 5bolt brake conversion on my 2000 GS-R. I thought that everything fitted bolt for bolt. I did the rear hubs, the center tables didn't fit (I had to use my GS-R ones). When I came to the front, my GS-R cardan joints are too small to fit in the hub. Do I need Type-R cardan...

Just bought from this guy. Good communication, fast shipping! Thanks Bump for a honest seller!

I got ADR M-Sport Hyper Black 17 x 7" 4 x 100 wrapped with 205/45/17 Yokohama Parada Spec-2. 2 in front almost done 2 in the back ok (they have a bit of camber thread use). A couple of scratches but nothing crazy. PM me for more pics. Thanks

I have ADR M-Sport Hyper Black 17's wrapped with Parada Spec-2 205/40/17 asking 800$ CAD + Shipping. The tires has a bit of inside camber wear, not alot. They are still in great shape. PM me for more info and pics.

Bump! PM Sent.

upp

-With ITR cams, springs, retainers I would be safe then? (I have a deal on a set, I would only have to buy OEM valves and I should be OK, if I understand you right?) -I fuel with 94 octaine fuel, it should be ok or I should get lower comp. pistons? -Engine management what does it do? Thanks

11.8 - 12.1 One of the kits on eBay. 84mm b20 high comp pistons. I will need the rods, studs, crank.