Search results

  1. M

    Timing problem!!!

    found out the problem.It was two vaccum lines on the intake manifold,I just switch the two vaccum lines. and set it at around 15 or 17 on the flywheel. then took it for a ride and felt better............thanx for the help guys
  2. M

    external\internal conversion done,but what about the extra wires?

    Okay I have a 96 prelude which is (external coil).I swaped out engines,Added the h22a which is (internal coil).Had to do the external\internal conversion.Everything became a success.The car runs o.k.No check engine light.After doing this coil conversion I notice I was left with extra wires.My...
  3. M

    Timing problem!!!

    thanx for the info.Thats proabaly what im proabably goin to have to do.So I can just put a h22a1 usdm if I cant find a jdm one? theres proabaly no difference between both.
  4. M

    96 prelude F22A to H22A swap

    If you swap a h22a on a 96 prelude f22a the only problem you would have is the connection on ur dizzy it wont match because h22a is (internal coil) and the 96 harness is (external coil) on less u have a obdII h22a jdm.Then if is a obdI engine u would need a p13 ecu. and would need a ecu jumper...
  5. M

    PS3 online ID

    PSN: mistamaser gasmes right know are :mw2-nba live 09-madden 09 and my favorite mortal kombat vs DC universe
  6. M

    Timing problem!!!

    timming problem im using a p13 ecu. Im starting to think the flywheel timming marks are different on the flywheel since im using a f22 on a h22.I need to find out but thanks for ur help
  7. M

    Timing problem!!!

    yes i did unless it was the wrong one ..the one i jumped was a blue 2p connector on the driver side. same one that i use to check my cel's
  8. M

    Timing problem!!!

    okay i swapped a h22a jdm engine into my 96 prelude,The h22a came with auto tranny.My car was a manual so i put the f22 tranny and flywheel on the h22a.Car runs okay,but I know it can run better.I checked the timing with the timing gun at 15 +/-2 on the flywheel (window where block and tranny...
  9. M

    injector resistor box

    well i bought a jdm p13 motor, so im asuming that the injecors are the original for the motor.i think there 355cc im not sure what type came with the motor.also just getting a usdm resistor box should do it then,also whats"peak and hold" and saturated differences?
  10. M

    injector resistor box

    the resistor box i got is for f22a1 sohc,the new motor is a h22a1 dohc,so how can i tell if i find one in the junk yard,will these explain why car runs fine sometimes and sometimes not?so in other words i need a p13 resistor box?
  11. M

    injector resistor box

    I read articles about injector resistor box that needs to be added on a 96 prelude (obdIIa) when doing a obdI h22a engine swap.I have a 96 prelude and i did the swap but my car has a resistor box.My question is when I did the swap did I had to change the sohc injector resistor box to a dohc vtec...
  12. M

    WTB:JDM p13 ECU

    i got ecu,but this is a automatic.Can i trade.I needed a manual
  13. M

    WTB:JDM p13 ECU

    p13 ecu if its the right one $100 shipped
  14. M

    WTB:JDM p13 ECU

    need a jdm p-13 ecu, must be 5 speed,virgin.obd1 ecu
  15. M

    CYP Sensor

    i got a code 9 but dont know what the sensor looks like can you help me ?
  16. M

    I need help!!

    Did you calibrate the TPS sensor
  17. M

    best tranny for my 96 lude

    Thanx for the info
  18. M

    best tranny for my 96 lude

    so theres really no difference in the f22 and h22? and on the timming should i set like if it was the f22
  19. M

    best tranny for my 96 lude

    just did a swap to my car took the type s engine out and replaced it with a jdm h22 the only problem is the h22 came with no tranny. So i used my type s manual tranny.car runs good but know it can run better!Just taking some suggestion on what tranny to buy.another reason im buying one is...
  20. M

    92 accord wire harness(need info please)

    Im asking about the wire harness. tha accord is a 92 model which was obd1 harness (internal coil) the 96 prelude although it was a 4th generation model in the 96 year the wire harness changed it became obd2a(external coil)know my question was if a obd2 harness from a accord. will fit a obd1...
  21. Try your Search on Google

Back
Top