Search results

  1. B

    Turbo Boosting B16A CRX, need more mods!

    dont bother getting Nos you could get the same power by increasing the boost, just get yourself some pistons/rods a good tune .;)
  2. B

    Built B18C 9.01 comp- Diagnosis- Revs die

    Thanks for the info. i setup my TPS when i first installed it on my TB. The running rich prob i think is sorted i have a crack in the EXH that was giving a fuel smell out..i havent installed the 750cc injectors yet.# Now its just the idling i have to get sorted. Its pissing me off... could a...
  3. B

    Built B18C 9.01 comp- Diagnosis- Revs die

    what do i need to setup on the TPS?? I cant remember properley but i think there was an O-ring and a sort of a spring that i installed.
  4. B

    vti going into an eg si

    You must be from europe somewhere- a vti is the european b16a1/2/3 or b18c4. A VTI on its own doesnt tell us anything is it a 1.8(b18c4) or a 1.6(b16a). what transmission do u have?(y21+s9b) what ecu do u have? etc etc etc etc :blink:
  5. B

    Built B18C 9.01 comp- Diagnosis- Revs die

    Would Cam timing cause the above charecteristics( dying idle/running rich). Thanks very much for your replies ive been extremely worried and your replies help :D I checked the vacuum leads on the intake mani they are all on i also checked the inatke gaskets i sealed them tight cant be that...
  6. B

    Built B18C 9.01 comp- Diagnosis- Revs die

    Its not throwing any codes at all, engine management light is NOT on. It doesnt even idle now it just dies off as soon as i start the car i have to rev it to get fired up, its also smelling rich, which is weird considering im using a B16-P30 to fuel a B18?? You mentioned timing what timing do...
  7. B

    Built B18C 9.01 comp- Diagnosis- Revs die

    Hi i have just swapped my b16a2 for a built 9.01 b18C4 for boost. I have kept my P30 that fuelled the B16.I have also installed a BBK intake manifold and a STR 70mm TB. After a few issues we fired the motor and its reading 180 180 180 180. I checked the plugs they re running rich? Now i kept the...
  8. B

    Help- Just built engine pumping air out of TB side

    Any ideas? anyone experienced anything similar?
  9. B

    Help- Just built engine pumping air out of TB side

    Hi ive just put my newly built engine into my car its a b18c i have just had pit in it:- CP pistons(9.01) manley rods supertech valve springs arp head bolts str blockguard ive connected everything up and when i tick the engine(without plugs) im getting air blowing outwards from the TB side...
  10. B

    BBk or aebs or blox manifold

    Hehe i was going with a "JG" but i come across the other manifolds, so the reason i asked was that maybe theres not much difference between them. I hear that BBK is supposed to be a copy of the JG only it has a 70mm inlet? hmm im inclining towards the BBK at the moment :blink:
  11. B

    BBk or aebs or blox manifold

    I wanna get rid of my GSR stock intake manifold. Which one would you buy out of the above for boost? <_<
  12. B

    3 Angle Valve's

    so will 30,45,50 on a b18c Turbo work.. i prob wont do it but just to gain some knowledge or just in case i get to the workshop tommorow and they are already done
  13. B

    3 Angle Valve's

    What he tells me is that he can manage the 30 deg cut and the 45 deg one but the machinery he has wont cut at 60 deg, but he can take it to 50 deg's. The thing is he has my head open for valve springs and he says he will do the 30deg,45 deg and 50 deg cuts at no charge. If i can produce some...
  14. B

    3 Angle Valve's

    Hi, on a b18c turbo im getting some headwork done and i have an option of an 3 angle valve job. Now the thing is the machinist says that he can do a 30 deg cut , 45 deg cut and as for 60 deg cut he cant manage it with the equipment he has and it will involve sending of the valves. I havent got...
  15. B

    400+hp Turbo clutch?

    Hi, what clutch should be used for turbo setups producing 400+hp. I currently have a 6 puck clutch in my car at the moment. If i want it to last fdor that power can i just get an act xtreme clutch plate and run my 6 puck disc? what are you using for that power?
  16. B

    b18c into EG with current b16a2-obd1

    will the b16a dizzy work on the b18c? itll save me rewiring the obd2 dizzy into the obd1. and will all the obd1 plugs fit on the b18c4 without adjustment and the mounts?
  17. B

    b18c into EG with current b16a2-obd1

    Im gonna be putting a built b18c into my EG civic which currently has a b16a2/obd1 in it at the moment. my question is if i use my b16a dizzy on the b18c and keep my 0bd1 wiring will the engine go in without any trouble or will i require other parts?can i keep my b16a alternator etc/gonna keep...
  18. B

    sc61 or t3/67 which route??

    i have a choice of a t3/t67 .63 .82 with a stage 5 wheel or a p trim, what should i get and whats different about the P trim is it worth the extra money? Quoted post ^^ p trim anyone??
  19. B

    sc61 or t3/67 which route??

    i have a choice of a t3/t67 .63 .82 with a stage 5 wheel or a p trim, what should i get and whats different about the P trim is it worth the extra money?
  20. B

    b18c stock size or 81.5mm pistons?

    so what size pistons do u advise me to get for my stock b18c??
  21. Try your Search on Google

Back
Top