OK I recently bought a 1993 Civic hatchback shell. the previous owner throw in a D16z6, then i got a decent deal on a b16a2 out of a 2000 si. I have every thing figured out regarding the B16A2 swap except for the engine harness. I have researched and have found conflicting information....
There's what i think:
2000 si harness ODB 2 one piece- can't use
d16z6 harness ODB 1 connects to the shock tower - I will have to change injectors, alt, dizzy, run vtec wire from ecu and extend some wires
ODB 2 integra connects to the shock tower - injectors, alt, and dizzy are good
cost $100 to $150
so the easiest option is to buy the odb 2 integra harness
with a p28 chipped ecu
am I right?
Thank you for the help
( my first HONDA)
There's what i think:
2000 si harness ODB 2 one piece- can't use
d16z6 harness ODB 1 connects to the shock tower - I will have to change injectors, alt, dizzy, run vtec wire from ecu and extend some wires
ODB 2 integra connects to the shock tower - injectors, alt, and dizzy are good
cost $100 to $150
so the easiest option is to buy the odb 2 integra harness
with a p28 chipped ecu
am I right?
Thank you for the help
( my first HONDA)