zone90cb7lx
just a noob...
well this is probably bad but at least change ur pads, that easy and you wont kill urself driving to the mechanic, wich should be your next stop
We may earn a small commission from affiliate links and paid advertisements. Terms
yah once i get money im going to have them done, but i dont have any money right now........
I have bought so many honda's 90-93 accord because the brakes were bad/rotors warped and the person selling the car either didn't know what was wrong or the mechanic quoted them a real high price to fix them. Have made alot of money off of these year accords. As the earlier thread mentioned thay are not pressed on, you just have to remove the four bolts on the back and it does come apart with special tool mentioned as well. Then you can replace the rotors with new ones and the brakes are like brand new. Correct me if I am wrong but don't they have a special rotor turner that works with the rotor still on the car? That might be cheaper for you the next time if there is still plenty of meat left on the rotor.
ok 60 bucks where did u get them done at?
I actually have that special tool, it resembles the old school steering wheel removing tool. I've done that job in 2 hours, 1 hour for each side. Without that tool the steering knuckles have to be removed, and hub pressed out.
as far as separating the hub from the knuckle, how bad will i f up the bearings/seals if i dont have a press and try to use a socket and hammer? or should i take it to my local napa? which i hate doing.